No products
Prices are tax included
Temperature and humidity monitoring Put on any surface or wall mount (all bracket included) Wide angle IR emitting Support built in and host IR code library OTA update the firmware over the air if your controller supports this feature
The smart thermostatic radiator head is designed to provide individual control of heating, room by room.
The Heatit ZM thermostat is a Z-Wave electronic thermostat for electric underfloor heating, or for controlling 220V solenoid valves for water underfloor heating, designed for wall mounting, in micromodule format.
Smart thermostat resulting from 4 previous generations of HEATIT Z-TRM thermostats. Allows manual adjustment of consumption measurement, switching via hysteresis or PWM, excellent design and quality. Z-Wave 800 chip DRY CONTACT relay up to 3A (potential-free - electrically isolated) Consumption measurement PWM/Hysteresis OTA updates Inputs for 2 wired...
Heat Pump /Regular AC ThermostatMH-3928 thermostat is used to control up to 3 stages heating and 2 stages cooling system with 8 types control systems, EM heat activation,adjustable compressor delay time and O/B changeover.
Z-Wave thermostat with dry contact relay for controlling valves, water heating solenoid valves, boiler actuators, hot water boilers, etc.
Battery-operated thermostat designed to control climate systems. It does not have an internal relay, so its usual use is in direct Z-Wave association with an auxiliary relay (not included) to control pumps, underfloor heating solenoid valves or directly the start/stop manoeuvre of a gas or oil boiler, etc. Z-Wave wireless home automation technology....
The Fan2-Control Thermostat for Fan Coil is a Z-Wave (700 series) enabled device for indoor temperature control. It is mainly applied to a 2-pipe Fan coil system. It can read the room temperature and automatically control the fan speed based on the temperature difference.
TRV or thermostatic radiator valve, allows regulating and/or closing the water flow to keep the room at a controlled temperature by operating on the inlet flow to the radiator. It has a temperature probe and behaves like a thermostat for hot water.
Smart thermostat resulting from 4 previous generations of HEATIT Z-TRM thermostats. It brings consumption measurement, ZeroX relay protection technology, hysteresis or PWM switching , excellent design and quality and 3 control modes. Chip Z-Wave 800 Relay up to 16A Consumption measurement PWM/Hysteresis OTA updates Inputs for 2 wired sensors
Heatit Z-Temp2 is a battery powered, surface mounted (non-flush) temperature thermostat designed for use with hot water based heating systems. It does not have a maneuvering relay.