Founded in 2006 as Aeon Labs in Silicon Valley, Aeotec has long focussed its craft on the intelligent automation of electronics through sensor and data driven decision making. Later, as Aeotec, we crafted the same types of products to the same high-quality but this time we did it under our own brandname. All this sees Aeotec play in a space known to some as home automation and to others as the Internet of Things.
In late 2018, under the stewardship of CEO Daniel P Dykes, Aeotec acquired German electronics maker POPP & Co. and focussed its efforts upon software and Zigbee technology for the first time. As part of the acquisition, and to reflect the engineering talent that came as part of its acquisition of POPP, Aeotec also used 2018 to also form a broader Aeotec Group and move its headquarters to Hamburg, Germany. After 90 years of pioneering home electronics and automating them, Aeotec continues to innovate being the first brand maker to certify and release devices which utilise 700 series Z-Wave technology. Aeotec followed up in short order by utilising technology acquired from the purchase of POPP to allow it to develop AutoPilot, the first automation software to be built upon 700 series Z-Wave technology. That gateway release was followed up in short order with the release of Aeotec Smart Home Hub and a range of SmartThings-compatible products.
This micromodule light regulator will allow to control a lamp or ceiling light remotely through the Z-Wave protocol while maintaining its existing switch.
The TriSensor includes the 3 basic sensors to make your home smart: motion, temperature and brightness.
The support for the water sensor 6 greatly improves the most important functions of the water sensor 6.
The control for blinds Z-Wave Aeotec Nano Shutter makes the motor controls of your blind, awning, blind or curtain, etc. are connected to your Z-Wave wireless network.
The length of the Aeotec LED Strip (AEOEZW121-2) is not long enough for you to create the perfect room atmosphere? No problem! Thanks to the Aeotec LED Strip Extension 1.2m which is separate available, you can easily extend the main LED Strip. A 6-pin connector makes installation quick and easy.
This indoor siren is the most popular alert system in the Z-Wave ecosystem. It plugs into a conventional socket and has a backup battery.
Cable or loop type sensor for the Aeotec water leak sensor for full length detection
With the Aeotec Smart Boost Timer Switch you can integrate your hot water boiler into the Z-Wave network. Optimise the time when you need the warm water individually or by means of the preset time periods of 30, 60, 90 or 120 minutes.
Doorbell 6 makes your front door smarter. With the Aeotec Button you complete your doorbell system.
Four button push button to control up to 15 scenes of your compatible Z-Wave gateway
This range extender works perfectly to amplify and repeat weak Z-Wave and Z-Wave Plus radio signals
The Doorbell 6 door chime makes your front door smarter.