Founded in 2006 as Aeon Labs in Silicon Valley, Aeotec has long focussed its craft on the intelligent automation of electronics through sensor and data driven decision making. Later, as Aeotec, we crafted the same types of products to the same high-quality but this time we did it under our own brandname. All this sees Aeotec play in a space known to some as home automation and to others as the Internet of Things.
In late 2018, under the stewardship of CEO Daniel P Dykes, Aeotec acquired German electronics maker POPP & Co. and focussed its efforts upon software and Zigbee technology for the first time. As part of the acquisition, and to reflect the engineering talent that came as part of its acquisition of POPP, Aeotec also used 2018 to also form a broader Aeotec Group and move its headquarters to Hamburg, Germany. After 90 years of pioneering home electronics and automating them, Aeotec continues to innovate being the first brand maker to certify and release devices which utilise 700 series Z-Wave technology. Aeotec followed up in short order by utilising technology acquired from the purchase of POPP to allow it to develop AutoPilot, the first automation software to be built upon 700 series Z-Wave technology. That gateway release was followed up in short order with the release of Aeotec Smart Home Hub and a range of SmartThings-compatible products.
The Aeotec Smart Switch 7 jack is a switch that allows you to control lighting or any other device through the Z-Wave controls.
1 small sensor. 4 main measurements built into any Z-Wave system that automates heating, cooling or air health.
Invisible automation is perfect automation. The Aeotec version 7 recessed door sensor is installed in the door frame or embedded in the door itself and is completely invisible.
The Water Sensor 7 Pro is a sensor designed to detect drips and leaks and help mitigate water damage.
With the Aeotec Multisensor 6 and its six sensors, you can make your home truly smart. So that you can enjoy your little multi-talent for a long time, we offer you an additional spare parts set, consisting of: Back plate Rear mounting arm USB Cable
The HAT Z-Pi type unit turns each Raspberry Pi or Orange Pi into a gateway or control unit for home automation with Z-Wave Plus2 technology (700 Series). Z-Pi is a GPIO adapter for this type of mini computers or development boards. Get into Z-Wave home automation with Z-Pi.
The Aeotec Range Extender 7 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Set of 2 repeaters (pack).
Manage your home automation locally, privately and without the need for the cloud. Aeotec's Z-Stick 7 allows you to create your own automation gateway using Z-Wave Gen7 technologies (700 series).
The USB adapter with Z-Wave Plus battery called Z-Stick Gen5 from Aeon Labs, will allow you to control and monitor any Z-Wave device from a PC or another gateway or compatible home automation controller
The Aeotec Door/Window Sesnsor 7 sensor for doors and windows is a sensor that detects whether the window or door is open or closed.
Extender / repeater to amplify the range of your network for Zigbee home automation. The Zi Range Extender manages the mesh optimization of your Zigbee network.
The Aeotec Door/Window Sensor 7 PRO sensor for doors and windows is a sensor that detects whether the window or door is open or closed. Also the degree of inclination (at least 5º) that can be used, for example, to check the state of tilt-and-turn opening in doors and windows.