The housing of the Ajax Button is designed to prevent false alarms even if you lie down or sit on the button. To further avoid false alarms, you can configure Button to react only with a double click or a long press.
Guarantees the sending of alarms
The Ajax panic button communicates with a hub using the Jeweler radio protocol at a distance of up to 1,300 m. Once it sends an alarm, you will see a green flash. Jeweler encrypts all transmitted data. In the event of signal interference or radio jamming, the Ajax system changes the radio frequency and notifies you and the security company of the situation.
Hassle-free installation
Scan the QR code using the Ajax app to register your Button. It is not necessary to disassemble the case; simply attach the device to the surface using the Holder. Or hang it from a lanyard or keychain. In a few minutes, the touch button will be ready to use.
Classification
Targeted Radio Panic Button
Compatibility
Only works with Ajax hubs and signal repeaters
False alarm prevention
Yes, in Panic mode
Alarm transmission
No more than 0.15 s
Active from the first click (no need to activate it)
Adjustable alarm types
Intrusion
Fire
Medical assistance
Panic button
Gas leak
Jeweler radio technology
Communication range with a hub: up to 1,300 m in open areas
Two-way communication channel
Operating Frequencies: 868.0 - 868.6 MHz
Self-adjusting radio frequency output power: up to 20mW
Block encryption based on AES algorithm
Frequency hopping
Feeding
CR2032 battery, 3V
Battery duration
Up to 5 years
Operating temperature range
Allowable humidity
Up to 75%
Protection classification
IP55
Dimensions
47 × 35 × 13 mm
Warranty
Repair and replacement up to 24 months after the date of purchase. Batteries are not covered by warranty.
Complete team
Panic button button
CR2032 battery pre-installed
Double sided tape
Fast guide