Cart
0
Product
Products
(empty)
No products
Free shipping!
Shipping
0,00 €
Tax
0,00 €
Total
Prices are tax included
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
(tax incl.)
Total shipping (tax incl.)
Free shipping!
Tax
0,00 €
Total
(tax incl.)
Aeotec
Aeotec Smart Boost Timer Switch - Z-Wave Timer
View larger
View larger
Aeotec Smart Boost Timer Switch - Z-Wave Timer
AEOEZWA006
New
With the Aeotec Smart Boost Timer Switch you can integrate your hot water boiler into the Z-Wave network. Optimise the time when you need the warm water individually or by means of the preset time periods of 30, 60, 90 or 120 minutes.
Out of stock
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Technical characteristics
| Technology | Z-Wave Plus |
More info
With the Aeotec Smart Boost Timer Switch you can integrate your hot water boiler into the Z-Wave network. Optimise the time when you need the warm water individually or by means of the preset time periods of 30, 60, 90 or 120 minutes.
The control is done manually at the Aeotec Smart Boost Timer Switch itself or in the Z-Wave system via App. The timer can switch loads up to 16A and has overvoltage protection and a repeater function. The device is usable in UK.
The Aeotec Smart Boost Timer Switch is a Z-Wave Plus enabled device and can be included/operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.The Aeotec Smart Boost Time Switch supports consumption meter function. When the device has been included in the network, it will report the consumption power periodically. It is also a high output countdown timer that can be used to control immersion heater elements or other electrical appliances rated up to 16A. On the product, four simple white LEDs are used to show the user how much time is left to run. Pressing the switch whilst the unit is operating allows the user to cancel the timing program,and the memory function of the timer will remember the last period selected.
Features:
- Timer for manual or remote control of connected devices
- Only usable in UK
- Max. Load: 16A
- Power supply: 80 - 250V
- Overvoltage protection
- Backup battery: CR2032 DC 3V
- Smart Start and safety standard S2
- Wireless technology: Z-Wave Plus
| Article Dimensions (WxHxL) | 83 x 83 x 47 mm |
| Package Dimensions (WxHxL) | 109 x 109 x 56 mm |
| Article net weight | 0.165 Kg |
| Article gross weight | 0.216 Kg |
| Z-Wave Plus | |
| Z-Wave S2 | |
| WEEE | |
| CE | |
| IP-Rating | IP20 |
Extended Z-Wave info
Name: Smart Boost Timer Switch
Manufacturer:Aeotec
Identifier:ZWA006-C
Z-Wave Certification Number:ZC10-18106255
Hardware Plattform:ZM5101
FLiRS:NO
Role Type:Always On Slave
Short Description:The Aeotec Smart Boost Timer Switch is a Z-Wave Plus enabled device and can be included/operated in any Z-Wave™ network with other Z-Wave™ certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
Description:The Aeotec Smart Boost Timer Switch is a Z-Wave Plus enabled device and can be included/operated in any Z-Wave™ network with other Z-Wave™ certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
The Aeotec Smart Boost Time Switch supports consumption meter function. When the device has been included in the network, it will report the consumption power periodically. It is also a high output countdown timer that can be used to control immersion heater elements or other electrical appliances rated up to 16A. On the product, four simple white LEDs are used to show the user how much time is left to run. Pressing the switch whilst the unit is operating allows the user to cancel the timing program,and the memory function of the timer will remember the last period selected.
Manual download HERE.
Group
Max Nodes
Description
1
5
COMMAND_CLASS_SWITCH_BINARY/SWITCH_BINARY_REPORT
COMMAND_CLASS_METER_V5/METER_REPORT_V5
COMMAND_CLASS_CLOCK/CLOCK_REPORT
COMMAND_CLASS_SENSOR_MULTILEVEL_V11/SENSOR_MULTILEVEL_REPORT_V11
COMMAND_CLASS_SCHEDULE/SCHEDULE_STATE_REPORT
COMMAND_CLASS_DEVICE_RESET_LOCALLY/DEVICE_RESET_LOCALLY_NOTIFICATION
2
5
COMMAND_CLASS_BASIC/BASIC_SET
Number
Size (Bytes)
Default Value
Name
Description
1
1
3
Power out action
Action in case of power out. This parameter is used to configure the device state after power on.
2
1
1
LED status
Configure LED (except boost) to be off irrespective of switch status.
20
2
100
kWh threshold setting
Threshold settings for energy kWh. When the energy above the threshold, it will send a meter report command to gateway.
21
2
100
Watt threshold setting
Threshold settings for Watt automatic report, unit W. When Watt above the threshold, it will send a meter report command to gateway.
22
2
0
Current threshold setting
Threshold settings for Current automatic report, unit 0.1A. When current above the threshold, it will send a meter report command to gateway.
23
4
600
Watt report interval
Watt automatic report interval, unit second.
24
4
600
kWh report interval
kWh automatic report interval, unit second.
25
4
600
Voltage report interval
Voltage automatic report interval, unit second.
26
4
600
Current report interval
Current automatic report interval, unit second.
3
4
0
Auto off timer
Timer acts as auto off after specified minutes, setting is set in seconds.
4
1
1
Current overload protection
Current and overload protection
5
2
30
Boost time
Configure boost time interval, unit minute.
7
2
100
LED threshold setting
This parameter is used to configure the power led threshold, unit W. When the load <= 100W, the power led will indicate yellow. When the load > 100W, the power led will indicate orange. When no load, the power led will indicate white.
Basic V2
COMMAND_CLASS_BASIC_V2
Association Group Info
COMMAND_CLASS_ASSOCIATION_GRP_INFO
Association V2
COMMAND_CLASS_ASSOCIATION_V2
Basic V2
COMMAND_CLASS_BASIC_V2
Clock
COMMAND_CLASS_CLOCK
Configuration
COMMAND_CLASS_CONFIGURATION
Device Reset Locally
COMMAND_CLASS_DEVICE_RESET_LOCALLY
Firmware Update Meta-Data V4
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
Manufacturer Specific V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
Meter V5
COMMAND_CLASS_METER_V5
Multi-Channel Association V3
COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3
Powerlevel
COMMAND_CLASS_POWERLEVEL
Schedule
COMMAND_CLASS_SCHEDULE
Security S0
COMMAND_CLASS_SECURITY
Security S2
COMMAND_CLASS_SECURITY_2
Sensor Multilevel V11
COMMAND_CLASS_SENSOR_MULTILEVEL_V11
Supervision
COMMAND_CLASS_SUPERVISION
Switch Binary
COMMAND_CLASS_SWITCH_BINARY
Transport Service V2
COMMAND_CLASS_TRANSPORT_SERVICE_V2
Version V3
COMMAND_CLASS_VERSION_V3
Z-Wave Plus Info V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
Inclusion
1. Power on the device, and the power led will blink blue slowly.
2. Put the Z-Wave Primary Controller into inclusion mode (If you don’t know how to do this, refer to its manual)
3. Press and hold the action button, and when the yellow LED is on, release the button. It indicates the device has enter learn mode.
4. If added successfully, the power LED will remain green for 2 seconds, then turn off.
2. Put the Z-Wave Primary Controller into inclusion mode (If you don’t know how to do this, refer to its manual)
3. Press and hold the action button, and when the yellow LED is on, release the button. It indicates the device has enter learn mode.
4. If added successfully, the power LED will remain green for 2 seconds, then turn off.
Exclusion
1. Power on the device.
2. Put the Primary Controller into exclusion mode (If you don’t know how to do this refer to its manual)
3. Press and hold the action button, and when the purple LED turns on, release the button. This indicates that the device has entered learn mode. If removal is successful, the blue LED will blink slowly.
2. Put the Primary Controller into exclusion mode (If you don’t know how to do this refer to its manual)
3. Press and hold the action button, and when the purple LED turns on, release the button. This indicates that the device has entered learn mode. If removal is successful, the blue LED will blink slowly.
Factory Reset
Please use this procedure only when the primary controller is missing or inoperable.
1. Make sure the device has been powered.
2. Press and hold the action button for 15 seconds. When the red LED turns on, release the button. Then, the device will enter factory reset mode. If the reset is successful, the LED will blink blue slowly.
1. Make sure the device has been powered.
2. Press and hold the action button for 15 seconds. When the red LED turns on, release the button. Then, the device will enter factory reset mode. If the reset is successful, the LED will blink blue slowly.
Additional Special Features
Boost Mode
1. Power on the device.
a) Press and hold the button about 1 second, when the power LED turns white, release the button. Then the 1st boost time LED will turn on. This indicates that the device entered boost mode. The switch will turn on immediately and will turn off after 30 minutes (This time can be changed through Configuration Parameter 5).
b) Press and hold the button about 1 second after doing a), when the power LED turns white, release the button. The 1st and 2nd boost time LEDs will turn on, which means the switch will turn off after 60 minutes.
c) Press and hold the button about 1 second after doing b), when the power LED turns white release the button. The 1st, 2nd and 3rd boost time LEDs will turn on, which means the switch will turn off after 90 minutes.
d) Press and hold the button about 1 second after doing c), when the power LED turns white release the button. The 1st, 2nd, 3rd, and 4th boost time LEDs will turn on, which means the switch will turn off after 120 minutes.
e) Press and hold the button about 1 second after doing d), when the power LED turn off release the button. Then all of the boost time leds will turn off, which indicates that boost mode has been exited.
2. Press and hold the button about 5 seconds.
a) When the power LED turns green, release the button, and the device will enter an override schedule state. At this state, the schedule task doesn’t work. The switch can only be turned on or off from the gateway.
b) When the power LED turns red, release the button, and the device will exit the override schedule state.
1. Power on the device.
a) Press and hold the button about 1 second, when the power LED turns white, release the button. Then the 1st boost time LED will turn on. This indicates that the device entered boost mode. The switch will turn on immediately and will turn off after 30 minutes (This time can be changed through Configuration Parameter 5).
b) Press and hold the button about 1 second after doing a), when the power LED turns white, release the button. The 1st and 2nd boost time LEDs will turn on, which means the switch will turn off after 60 minutes.
c) Press and hold the button about 1 second after doing b), when the power LED turns white release the button. The 1st, 2nd and 3rd boost time LEDs will turn on, which means the switch will turn off after 90 minutes.
d) Press and hold the button about 1 second after doing c), when the power LED turns white release the button. The 1st, 2nd, 3rd, and 4th boost time LEDs will turn on, which means the switch will turn off after 120 minutes.
e) Press and hold the button about 1 second after doing d), when the power LED turn off release the button. Then all of the boost time leds will turn off, which indicates that boost mode has been exited.
2. Press and hold the button about 5 seconds.
a) When the power LED turns green, release the button, and the device will enter an override schedule state. At this state, the schedule task doesn’t work. The switch can only be turned on or off from the gateway.
b) When the power LED turns red, release the button, and the device will exit the override schedule state.
S2 Authenticated
S2_AUTHENTICATED
S2 Unauthenticated
S2_UNAUTHENTICATED
Switch Type
Describes the type of operator for a switch.
Switch Load Capacity Current
The amount of switch load energy the product is rated for in Amps
Supported Meter Type
Indicate which type of metering is supported by the device.
Firmware Updatable
Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.
Switch Load Capacity Volt-Ampere
The amount of switch load energy the product is rated for in VA (Volt-Amperes)
Battery Quantity
Enter the number of batteries of the designated type that the product uses.
Battery Type
Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.
Color
If the product is only available in one color, pick the color from the list.
Sensors
Sensor types supported by the product.
Switch Load Capacity Watts
The amount of switch load energy the product is rated for in Watts
Electric Load Type
Select the electric load type(s) supported by the device.
Neutral Wire Required
For electric in-wall/wired switches, indicate whether a neutral wire is required for installation.
