Aeotec Smart Home Hub - SmartThings Hub

More info

Connected Living with Aeotec, powered by SmartThings.

Synchronize your home with your lifestyle. Let SmartThings share information about your connected devices, help you with chores and enhance your experiences, both inside and outside the home. All this with a single home automation application on the mobile.

The Aeotec Smart Home Hub Home Automation Controller - (SmartThings Hub) is the link and the perfect conductor for your smarthome experience. It allows you to wirelessly connect a wide range of smart devices for compatible wireless home automation, such as lights and sensors, based on multiple protocols: Z-Wave, ZigBee and WiFi, so this is a hybrid home automation controller with the power of the motor of SmartThings software and its well-known and popular App.

aeotec smart home hub

Everything is focused on automating your personal routines with the SmartThings application for the greatest of comforts. So you can create your own scenarios and your own nightly routines: you just have to relax on the sofa, while all your thermostats change to a suitable temperature, the smart lights are dimmed to create a cozy atmosphere and a completely pleasant atmosphere is created.

The Aeotec Smart Home Hub fits perfectly into your home. The small and slim Aeotec Smart Home Hub with its simple design integrates perfectly into your home automation. So you can place the Hub anywhere in the house and add a stylish component to your home.

Works with SmartThings Hub

Connect your devices with one of the most popular smart home ecosystems in the world. Search for "Works with SmartThings" which is the certification program for manufacturers and service providers. The more than 5000 certified products are connected to the SmartThings platform. With that you can control everything from one application. We offer you an exclusive selection of SmartThings compatible products valid in Spain and Portugal (and in Europe in general) .

Works like a SmartThings Hub

Your smart home needs a brain. With the Aeotec Smart Home Hub you can connect Z-Wave, Zigbee or Wi-Fi devices, which are certified as Works with SmartThings. All these devices connect directly to the Hub and can be controlled and managed very easily.

Aeotec works with SmartThings

Explore the endless possibilities of the Aeotec Works with SmartThings portfolio of devices. Connect sensors with actuators to turn lights on automatically, when there is movement. Or receive a push message if someone opens the window without authorization. How to make a home automation can be taken to another level thanks to the compatibility of Aeotec products with the SmartThings app.

The Aeotec Smart Home Hub home automation controller is compatible with a wide range of Z-Wave, Zigbee and WiFi / IP products. With Z-Wave and Zigbee connectivity many products, which are available in our online store, can be connected to the Aeotec Smart Home Hub "Works as SmartThings" controller.

SmartThings app

With the SmartThings app, you can connect and control multiple devices faster and easier. No matter where you are, you can monitor and control smart devices and household appliances, such as refrigerator, washing machine, dryer, oven, dishwasher, hob, robot vacuum cleaner, air conditioner and air purifier, among others.

Smartthings - aeotec smart home hub Spain / Portugal

Technical characteristics:

Monitor and control connected devices through the SmartThings app
Receive notifications of status changes from connected sensors
Automate personal routines with SmartThings
Compatible with Google Assistant and Amazon Alexa
Supports Zigbee 3.0, Z-Wave, WiFi
Power supply: 5V, 2A power adapter (Type C plug)
Regions: valid in EU (plug type C)
Z-Wave frequency: 868.4 MHz (EU)
Certifications: Zigbee, Z-Wave, WWA, WWGA, FCC / IC / CE
Packing content:

Aeotec Smart Home Hub
5V USB power adapter (Type C)
power cord,
LAN cable
Handbook

Extended Z-Wave info

Name: Smart Home Hub

Manufacturer:Aeotec

Identifier:IM6001-V3P22

Z-Wave Certification Number:ZC10-21017005

Hardware Plattform:SD3503

FLiRS:NO

Role Type:Central Static Controller

Short Description:Smart Home Hub, which works as SmartThings Hub with the SmartThings platform app.

Description:The "brain" of the SmartThings platform, the Hub connects all of the different sensors and actuators around your home or office so that you can receive notifications. With that you always know what is going on and you can use your smartphone to remotely control your home's security, energy usage, lighting, and more.

Manual download HERE.

Group

Max Nodes

Description

1

5

Lifeline connection

Number

Size (Bytes)

Default Value

Name

Description

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic

COMMAND_CLASS_BASIC

CRC16 Encapsulation

COMMAND_CLASS_CRC_16_ENCAP

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Door Lock V2

COMMAND_CLASS_DOOR_LOCK_V2

Inclusion Controller

COMMAND_CLASS_INCLUSION_CONTROLLER

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Multi-Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Multi-Channel V4

COMMAND_CLASS_MULTI_CHANNEL_V4

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Switch Binary

COMMAND_CLASS_SWITCH_BINARY

Switch Multilevel V3

COMMAND_CLASS_SWITCH_MULTILEVEL_V3

Thermostat Fan Mode V3

COMMAND_CLASS_THERMOSTAT_FAN_MODE_V3

Thermostat Mode V2

COMMAND_CLASS_THERMOSTAT_MODE_V2

Thermostat Operating State V2

COMMAND_CLASS_THERMOSTAT_OPERATING_STATE_V2

Thermostat Setpoint V2

COMMAND_CLASS_THERMOSTAT_SETPOINT_V2

Version V2

COMMAND_CLASS_VERSION_V2

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

CRC16 Encapsulation

COMMAND_CLASS_CRC_16_ENCAP

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Inclusion Controller

COMMAND_CLASS_INCLUSION_CONTROLLER

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V2

COMMAND_CLASS_VERSION_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Where to find S2 DSK on product

The S2 DSK (Device Specific Key) is used to authenticate the included device before exchanging the network keys. You can find DSK in the Hub's detail page at the dashboard.

Controller Replication

To add a Z-Wave device to the Hub's network or copy network information to another controller, check out our guide on setting up new devices

Controller Learn Mode

Because the Hub is a certified Z-Wave device, you can add it to another Z-Wave network. Note that you can only add a Hub to a different Z-Wave network if no Z-Wave devices have been added. Otherwise, you should remove all Z-Wave devices from the Hub first by putting them through a device exclusion. When the Smart Home Hub is used as a secondary controller on a Z-Wave network, it may not receive notifications from some battery-operated devices. SmartThings Technical Support does not provide assistance to consumers using the Hub with other Z-Wave central controllers. Here are the steps to put the Hub into learn mode to receive network information from another Z-Wave controller Prepare the other Z-Wave controller to copy its network information to the Hub. This may be called include, add, transfer, shift, copy, or replicate mode. Add Hub to an existing Z-Wave network in Z-Wave Utilities menu will start learn mode on the Hub. It may take longer to receive all the network info and load all the devices. Check the other controller for confirmation of whether the transfer was successful. Depending on the other controller, it may not have transferred the primary controller role to the Smart Home Hub, and the Hub may not be able to add new devices. To remove the Hub from the other network and reset it to default, follow the same steps above, but put the other controller in remove or exclude mode instead.

Controller Classic Inclusion

The Smart Home Hub connects all of your smart devices with one another, the SmartThings cloud, and the SmartThings mobile app. From the Home screen, touch the Plus (+) icon and select Add device. While the Hub searches, perform the connection/inclusion process specific to that device.

Controller Classic Exclusion

Z-Wave devices require a separate command and physical confirmation from the device itself (usually a button press) in order to be reset (or "excluded") and removed from a controller (like the Smart Home Hub). Before removing a Z-Wave device, make sure you’ve uninstalled any configurations associated with the device. Your Hub will enter exclude mode automatically when you remove a Z-Wave device via the Things page. When prompted, execute the required button press or exclusion process as outlined by the device's user guide. Perhaps you're having trouble adding a Z- Wave device that was previously in use by a Smart Home Hub or another type of Z-Wave controller. Or maybe your new device won’t connect after several attempts. Sometimes a device partially connects, or is partially removed, behind the scenes. Resetting/excluding the device through the General Z-Wave Device Exclusion in Z-Wave utilities menu will likely fix these problems. Then, you will be able to connect the device as usual.

Factory Reset Procedure

To reset your Hub's Z-Wave system to factory default settings, you must factory reset the entire Hub. You can factory reset your Hub with Remove Device menu in SmartThings mobile app.

NOTE : Resetting the Hub will restore factory settings. All device connections, automations, rules, configurations associated with that Hub will be lost in the reset. All devices connected to your Hub will have to be reset or excluded before they can be reconnected. The steps for resetting and reconnecting each smart device differ. After resetting, you can visit our Things category, find the devices you wish to set up, and follow the guides provided. Remember that you will likely need to reset or “exclude” every device before connecting.

S2 Access Control

S2_ACCESS_CONTROL

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED

Communications Connections

Connectivity for communications with a host control computer or system.

Z-Wave Scene Type

Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

Communications Protocol

For external interfaces, choose the communications protocol used.