No products
Prices are tax included
Product Under Order
INWMPPAN001R000
New
Monitor and control your Daikin air conditioning system remotely through your home automation system.
Out of stock
WiFi Interfaces for Air Conditioners Intesis's WiFi interfaces have been specifically designed for the integration of AC in home automation systems. Communication is based on a simple ASCII protocol that can be easily implemented as a driver in home controllers or Smart Hubs. With the drivers already available on many Home Automation platforms on the market, the Air Conditioning units can be easily integrated and controlled.
General characteristics for the WiFi configuration WiFi that supports both dynamic and static IPs. Drivers available for the main manufacturers of Home Automation. Generation of new integration drivers with an easy and open protocol. Auto-discovery of WiFi devices installed on the network. Two types of solutions: Brand-specific solutions with direct connections that support the unit's error code data, and a universal solution based on infrared (IR) communication.
The DK-AC-WMP-1 interface enables a complete and natural integration of Daikin air conditioners into IP based control systems. Compatible with domestic line models (RAC) marketed by Daikin.
Carefully follow these safety and installation instructions. Improper work can result in serious damage to your health and can also seriously damage the interface and / or the AC indoor unit.
FEATURES :
Monitors the temperature of an air-conditioned area
Control the temperature of an air-conditioned area
Create automatic air conditioning management Compatible with eedomus and Vera home controllers (soon with Jeedom)
TECHNICAL SPECIFICATIONS :
Case: ABS (UL 94 V-0). 2.1mm thick
Dimensions: 127 x 50 x 17mm
Weight: 80g
White color
Power supply: 12V, 60mA typical. Does not require an external power source (supplied by the AC unit)
Radio parameters
RF frequency range: 2412 to 2484 MHz
Output power (average):
20 dBm (11Mb / Sec.)
14 dBm (72.2Mb / Sec.)
Mounting: Wall
LED indicators: 1 x Device status
Operating temperature: From 0ºC to 40ºC
Operating humidity: <93% RH, non-condensing
Air humidity: <93% RH, non-condensing
RoHS Compliance: Compliance with RoHS Directive (2011/65 / EU).