No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
QUBINO Smart Meter - Z-Wave electrical consumption measurement module for DIN rail
ZMNHTD1
New
Power consumption meter module Z-Wave Plus Qubino Smart Meter for DIN rail mounting of electrical panel. Calculate the energy, power and power factor of the measured signals among other values.
In Stock
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Technical characteristics
| Technology | Z-Wave Plus |
| Characteristic | Consumption Measurement |
More info
The world's most powerful Z-Wave intelligent electric consumption meter
The Qubino Smart Meter is an extremely versatile and powerful Z-Wave module for measuring energy consumption in a single-phase power grid of up to 65A. A built-in microprocessor calculates the energy, power and power factor of the measured signals. It is designed to be mounted on a DIN rail.
What is it for?
The Qubino Smart Meter module can be used in residential, industrial applications and by electrical operators. Measures energy directly in 2-wire networks by fast sampling of voltage and current signals. Calculate the energy, power and power factor of the measured signals. You can control the module through the Z-Wave network. It also acts as a repeater in order to improve the range and stability of the Z-Wave network. The smart meter is designed to be mounted on a DIN rail.
The simplest installation
There is no simpler installation than the DIN rail installation - and the Qubino Smart Meter is a module mounted on a DIN rail. Watch the video to learn more.
Note: Keep in mind that this module requires NEUTRAL to operate.
If you want to know more, you can also access this INTERESTING ARTICLE
The most proven and reliable Z-Wave modules
Qubino's Z-Wave modules are install-and-forget products. The Qubino products that we offer, are manufactured to last, so they only use electronic components that meet the most demanding levels of quality. Our modules are also the most tested Z-Wave micromodules on the market. The Slovenian Institute of Quality and Measurement (SIQ), an independent European entity, checks the quality of the actual parameters of our products, including temperature increases, manufacturing, insulation resistance, electrical consumption and overloads according to European standards of the highest quality according to the specification of standard EN 60669-2-1.
Additional parameters for professionals
The module for DIN rail Qubino Smart Meter It has 23 additional parameters for its use by experts. Some of the most useful are:
- Selection of the function of the input switch
- Automatic start / stop of the external relay after the adjusted output
- Reports in watts about the change of power or time intervals
Technical specifications and electrical diagrams:
Accessories for QUBINO Smart Meter
External Relays
The Qubino Smart Meter module can also control electrical loads (on / off) by adding an external relay-actuator:
- Bistable switch (32A) BICOM432-40-WM1, controlled by the optical communications (IR) port
- Switch (32A) IKA232-20 / 230 V controlled by the output in terminal 5
Technical specifications
| Main terminals (LI, NI, Lo, No) | |
| Contacts capacity: | 1.5 & 16 (25) mm2 |
| Connection screws: | M5 |
| Max torque: | 3.5 Nm (PZ2) |
| Optional terminals (1,2,4,5) | |
| Contact capacity: | 0.05 & 1 (2.5) mm2 |
| Screws: | M3 |
| Max torque: | 0.6 Nm |
| Measuring input: | |
| Type (connection): | single phase (1b) |
| Reference current (Iref): | 5 A |
| Maximum current (Imax): | 65 A |
| Minimum current (Imin): | 0.25 A |
| Starting current: | 20 mA |
| Voltage (Un): | 230 V (± 20%) |
| Power at Un: | <2 W |
| Nominal frequency (fn): | 50 and 60 Hz |
| Accuracy: | |
| Active energy and power: | |
| Standard EN 62053-21: | class 1 |
| Standard EN 50470-3: | class B |
| Reactive energy: | |
| Standard EN 62053-23: | class 2 |
| Optical communication: | |
| Type: | IR used to control BICOM432-40-IR |
| Input (1): | |
| Rated voltage: | 230 V (± 20%) |
| Input resistance: | 450 kOhm |
| Safety: | |
| Indoor Meter: | And it is |
| Degree of pollution: | 2 |
| Protection class: | II |
| AC voltage test: | 4 kV |
| Installation Category: | 300 VRMS Cat. III |
| Standard: | EN 50470 |
| Ambient conditions and EMC: | Meets standards for indoor active energy meters. Temperature and climatic conditions to EN 62052-11 |
| Ambient conditions and Safety: | Meets standards for indoor active energy meters. Temperature and climatic conditions to EN 62052-11 |
| Dust / water protection: | IP20 |
| Operating temperature: | -10 & 40 ° C |
| Storage temperature: | -40 & 70 ° C |
| Enclosure material: | self-extinguishing |
| UL94 V compliant | And it is |
| Indoor meter: | And it is |
| Degree of pollution: | 2 |
| AC voltage test: | 4 kV |
| Standard: | EN 50470 |
| Distance: | up to 30 m indoors (depending on building materials) |
| Weight (with packaging): | 150 g (170 g) |
| Frequency range: | 868.4 MHz, Z-Wave |
| Installation | Din rail 35 mm |
| Dimensions (WxHxD): | 36 x 90 x 64 mm |
* In the case of loads other than resistive loads, pay attention to the value of cosÆ and, if necessary, use a load lower than the nominal load. The maximum current for cosÆ = 0.4 is 3 A at 250 VAC, 3 A at 24 VDC L / R = 7 ms.
CHARACTERISTICS: Measurement of global energy consumption or circuit Provides data of voltage, current, active, reactive and apparent power and power factor Z-Wave chip series 500 (Z-Wave +) is integrated 250% faster communication compared with standard Z-Wave devices The first DIN rail Z-Wave Module Worldwide Operating temperature -10 to 40 ° C optical communication port (IR) for the external relay BICOM432-40-WM1 Output for connecting an external contactor IKA232-20 / 230 V
 |
 |
Download
Extended Z-Wave info
Manual download HERE.
1. Connect the device to the power supply
2. Make sure the device is within direct range of your Z-Wave gateway (hub) or use a hand-held Z-Wave remote to perform exclusion
3. Enable add/remove mode on your Z-Wave gateway (hub)
4. Press and hold the S service button between 0.2 and 6 seconds
5. The device will be removed from your network but custom configuration parameters will not be erased
1. Enable add/remove mode on your Z-Wave gateway (hub)
2. Automatic selection of secure/unsecure inclusion
3. The device can be automatically added to a Z-Wave network during the first 2 minutes
4. Connect the device to the power supply
5. Auto-inclusion will be initiated within 5 seconds of connection to the power supply and the device will automatically enrol in your network
ⓘ NOTE: For S2 inclusion please check chapter – »16. Z-Wave Security«.
MANUALLY ADDING THE DEVICE TO A Z-WAVE NETWORK (MANUAL INCLUSION)
1. Connect the device to the power supply
2. Enable add/remove mode on your Z-Wave gateway (hub)
2. Toggle the Service button S between 0.2 and 6 seconds
3. A new multi-channel device will appear on your dashboard
1. Connect the device to the power supply
2. Press and hold the S service button between 6 seconds and 20 seconds
3. Device will be removed from you network
ⓘ By resetting the device, all custom parameters previously set on the device will return to their default values, and the owner ID will be deleted. Use this reset procedure only when the main gateway (hub) is missing or otherwise inoperable.
Reviews
Visualizar mediciones smart meter qubino
Tengo conectado a mi contador de luz dos smart meter qubino, ¿como puedo visualizar los consumos y producción eléctrica de los panele solares. Hay alguna app que se pueda hacer. Gracias
Medidor para EV
Utilizo Qubino Smart Meter para controlar la carga de mi vehiculo electrico. Lo recomiendo.
