ekey home FS UP I - fingerprint reader for integration

The ekey home flush-mount finger scanner for intercom system integration is a biometric sensor terminal for fingerprint registration using an Authentec RF line sensor. This ekey home finger scanner is used to recognize authorized persons and the consequent opening of entrance doors, apartment doors, garage doors, etc. The finger scanner is intended for use in the domestic and commercial sector. The ekey home recessed finger scanner I is intended for fixed recessed installation in immovable parts, such as intercoms, and for use in protected outdoor areas. For its operation, you will also need a suitable control unit, a suitable power supply and a suitable intercom installation module, a suitable decorative panel or a suitable installation frame.

For its operation, the finger scanner must be connected to the ekey house control unit.
The finger scanner itself is equipped with intelligent software. This software learns with each use and recognizes changes in user habits.

functions:
- protected against manipulation
- Data is retained after power failure
- Bus termination can be disabled on the device

- compatible with many intercom installation modules, mailboxes, wall installation kits, etc.
- Indicator / display: 3 LEDs of different colors

Technical data:

Power consumption: approx. 1 W
Supply voltage: 8-24 VAC, 8-30 VDC
Temperature range: -25 ° C to 70 ° C
Protection class: IP64
Recommended mounting height: 155 cm / 110 cm *.
Indication / display: 3 multi-color LEDs
Functions: 99 fingers can be stored, protected against manipulation,
Data is retained after power failure,
Bus termination can be disabled on the device