Phoscon ConBee III Phocon ConBee III - Gateway Universal Zigbee 3.0 USB Matter over Thread + BT

• unites Zigbee devices of many vendors
• a cloud free solution
• high range of up to 30 m in buildings and 200 m in open field
• works with popular Home Automation Systems

What’s new 

The shipping firmware supports Zigbee 3.0 and Zigbee Green Power devices. An OpenThread Border Router firmware is offered as an alternative application.

• modern SiLabs EFR32MG21 micro controller
• custom Zigbee 3.0 and Zigbee Green Power firmware
• Bluetooth Low Energy (BLE) for future Thread and Matter applications
• integrated push button for service functions

Compatibility 

The ConBee III is compatible with a wide range of lights, switches and sensors from Philips Hue, Ikea Tradfri, Xiaomi Aqara, Ledvance Smart+, Silvercre

https://phoscon.de/en/conbee3/compatible

Technical specification

Further information

Leaflet

The product leaflet is available for download: Leaflet_ConBee3_de_eng.pdf

CE RED Declaration of Conformity

Hereby, dresden elektronik ingenieurtechnik gmbh declares that the radio equipment type ConBee III is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: CE-ConBee_III_en.pdf

FCC part 15 compliance statement

FCC ID: XVV-CONBEE3

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information: This product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.

FCC RF Exposure Information and Statement: The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: ConBee III (FCC ID: XVV-CONBEE3 ) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for properly worn on the body is 0.51W/kg. This device was tested for typical bodyworn operations with the product kept 5 mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 5 mm separation distance between the user’s body and the product. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Bodyworn Operation: This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5 mm must be maintained between the user’s body and the product, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

ISED compliance statement

IC: 8720A-CONBEE3

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The SAR limit for Industry Canada is 1.6 W / kg averaged over one gram of tissue. The ConBee III model device types (IC: 8720A-CONBEE3 ) were also tested against these values. The highest SAR value reported under this standard during product certification for properly worn on the body is 0.51W/kg.This device has been tested for typical operations using the accessory worn on the body with the product kept at 5 mm from the body. To maintain compliance with RSS-102 requirements, use accessories that maintain a separation distance of 5 mm between the user’s body and the product. The use of belt clips, cases and similar accessories shall not contain any metal components as a whole. The use of accessories that do not meet these requirements can not meet the requirements of RSS-102, and should be avoided.

Le présentappareilestconf orme aux CNR d’ Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes:

1. l’appareil ne doit pas produire de brouillage, et
2. l’ utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement.

Le das limite pour industrie Canada est de 1,6 W/kg en moyenne pour un gramme de tissu. Les types d’appareils du modèle ConBee III (IC: 8720A-CONBEE3 ) ont également été testés en fonction de ces valeurs. La valeur de das la plus élevée déclarée en vertu de cette norme pendant la certification du produit pour porter correctement sur le corps SAR de 0.51W /kg. Cet appareil a été testé pour des opérations typiques utilisant l’accessoire porté sur le corps avec le produit maintenu à 5 mm du corps. Pour respecter les exigences de la norme RSS-102, utilisez des accessoires qui maintiennent une distance de séparation de 5 mm entre le corps de l’utilisateur et le produit. L’utilisation des agrafes de ceinture, des étuis et des accessoires similaires ne doit comporter aucun élément métallique dans son ensemble. L’utilisation d’accessoires qui ne répondent pas à ces exigences ne peut pas répondre aux exigences de RSS-102, et doit être évitée.

Declaration of Compliance for Regulatory Compliance Mark

This product has been tested to comply with the ACMA mandated standards and authorize the product to label with RCM (Regulatory Compliance Mark).

Declaration of Compliance: RCM_ConBee_III_en.pdf

Warranty

Our products are quality-tested and provided with the statutory warranty period of 24 months from the date of purchase. Please keep the invoice as proof of purchase.