AJAX MotionProtect Outdoor - Outdoor anti-pet PIR detector

• Authentication to avoid forgery
• Detection of inhibition and encryption of communication channels
• Tamper tamper
• Grade 2 security
• Detect movement at a distance of 3 to 15 meters
• Ignore pets with a height of up to 80 cm
• Works up to 5 years without replacing the battery

Detect people accurately

LISA turns MotionProtect Outdoor into a formidable barrier against intruders. The digital algorithm accurately identifies a person's movement while ignoring that of animals, trees, plants, birds, and insects that land on the detector.

Avoid intrusions invisible to the naked eye

MotionProtect Outdoor has the highest possible protection for external detectors. The anti-masking function, activated by default 24 hours a day, detects barriers, the sticking of adhesives, the application of paint or the clear coating on one or two lenses. The tamper tamper alerts of the opening of the anti-dust and anti-humidity detector.
Anti-masking grade 3
Detects the application of paint or adhesives on the detector
Protection against unauthorized opening

Ready to go straight out of the box

MotionProtect Outdoor comes with a pre-installed battery, so there is no need to disassemble it. The detector can be connected to the central unit (hub) with a single click on the mobile app. It can be installed on the SmartBracket at a height of between 0.8 and 1.3 meters in a few minutes. Although the total battery life is 5 years, it is possible to connect an external power supply.

• Pre-installed batteries
• Quick installation support
• Mobile application for configuration and testing

Technical specifications:

Classification: Safety detector with electro-optical radio channel
Detector Type: Wireless
Installation method: Outdoor / Indoor
Compatibility: Only works with Hub, Hub Plus and ReX
Sensor: Two passive infrared sensors
Alarm signal reception time: 0.15 s
Motion detection distance: Adjustable, 3 to 15 m
Detection angles: Horizontal: 90º
Sensitivity: 3 levels adjustable
Recommended installation height: 0.8 to 1.3 meters
Pet immune: Weight: irrelevant
Height: up to 80 cm

Power supply: 2 CR123A batteries
Power supply voltage: 3V
Battery life: up to 5 years
Main supply: 12V DC ± 20%

Radio Jeweler Protocol
Communication range with the central unit: up to 1700 m in open spaces
Two-way communication between devices
Operating Frequencies: 868.0-868.6 MHz
Self-adjusting radio frequency output power: up to 20mW
Block encryption based on AES algorithm
Detector polling period: 12,300 seconds

Read more about Jeweler>

Temperature sensor: Available
Operating temperature range: -25ºC to 60ºC
Allowable humidity: Up to 95%
Protection rating: IP54
Anti-sabotage function: Anti-masking grade 3
Tamper Protection: Inhibition Detection and Notification
Tamper resistant: Remote setup and testing +

Dimensions: 184x70x65 mm
Weight: 318g
Certification: Meets the requirements of CU TR 020/2011 Electromagnetic compatibility of technical media, EAC
Certification: DSTU EN 50131
Warranty: Repair and replacement up to 24 months after the date of purchase. The warranty does not cover batteries

Content:
MotionProtect Outdoor motion detector
SmartBracket fixing panel
Two CR123A batteries (pre-installed)
Installation kit
User's guide