No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Qubino Flush 1D Relay (Relay Z-Wave Dry Contact)
ZMNHND1
New
Micromodule 1 relay On / Off, Qubino Flush 1D is used to turn on / off, with Z-Wave Plus technology. The output contact is voltage free (D = Dry; dry contact), so we are talking about a dry contact relay
Out of stock
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Technical characteristics
| Technology | Z-Wave Plus |
More info
The smallest Z-Wave dry contact relay in the world
The Qubino Flush 1D relay is ideal as a dry contact switch for lights, fans, ovens, washing machines, irons, sockets, garage doors, electric radiators, water heaters, etc. The output contact is voltage-free (dry contact). Different loads can be connected to the module. It also supports the connection of a digital temperature sensor.
As the output contact is voltage free (dry contact), loads with different voltages and / or power supplies can be connected to the module.
It is a micromodule that allows us to use its relay both with 230V current and 12 or 24V, and even as a dry contact because the relay circuit is independent (electrically isolated). We remind you that previously for dry contact we had the Fibaro 1 × 2,5kW module that has been replaced by the "Single Relay" but that the latter no longer allows to be used as a dry contact, so this module of Qubino becomes even more interesting if it fits. (September 2016).
What is it for?
The Qubino Flush 1D is ideal for home automation control of electrical appliances such as lights, fans, ovens, washing machines, irons, sockets, garage doors, electric radiators, water heaters and the like.
The smallest Z-Wave dry contact relay
The Z-Wave dry contact relay Qubino Flush 1D is a micromodule that occupies less space than any other module with which it is compared to any other competitor and will fit easily into any conventional mechanism box.
Energy consumption
The Z-Wave Qubino Flush 1D dry contact relay , when it is in standby, only consumes 0.4 W. Awesome!
Very versatile
The Qubino Flush 1D , dry contact relay, can operate over a wide range of temperatures from cold -10ÚC to suffocating 40ÚC (14Ú 104ÚF). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Each module also acts as a repeater in order to improve the range and stability of the Z-Wave network.
The simplest installation
The extremely small size and a specially designed housing mean that the connection of the module inside a recessed mounting box is simple. The installation process, tested and approved by professional electricians , consists of only three simple steps:
1 - Remove the switches from the box and disconnect the cables.
2 - Connect the cables to the Qubino module and insert them into the box.
3 - Fix the switches to the box.
The most proven and reliable Z-Wave modules
Qubino's Z-Wave modules are install-and-forget products. The Qubino products that we offer, are manufactured to last, so they only use electronic components that meet the most demanding levels of quality. Our modules are also the most tested Z-Wave micromodules on the market. The Slovenian Institute of Quality and Measurement (SIQ), an independent European entity, checks the quality of the actual parameters of our products, including temperature increases, manufacturing, insulation resistance, electrical consumption and overloads according to European standards of the highest quality according to the specification of standard EN 60669-2-1.
Additional parameters for professionals.
The Qubino Flush 1D micromodule It has 11 additional parameters for its use by experts. Some of the most useful are:
- Adjustment of the mono-stable type (pulsator) or bi-stable
- Activate or deactivate the ALL ON / ALL OFF functions
- Automatic on / off output after set time
Electrical diagrams of the Z-Wave dry contact relay Qubino Flush 1D Relay
| .jpg) | ||||||||||||||||
.png) |
| ||||||||||||||||
Additional functionalities allow for smarter housing and offices.
The module can be used as an extension for the control of the heating / cooling system. The module has the option of connecting a digital temperature sensor.
The Qubino Flush 1D is a module also used for scenes and trigger execution and increase comfort and safety with additional sensors. The Qubino Flush 1D Relay relay has two free binary inputs.
Option 1: 1 additional relay + 1 push buttons for scenarios
Option 2: 1 additional relay + 2 push buttons for landscapes and temperature sensor
Technical specifications:
| Feeding: | 110 230 VAC ± 10% 50/60 Hz, (24 30 VDC) |
| Maximum AC output load (resistive load) * | 1 X 10 A / 230 VAC |
| Maximum DC output load (resistive load) * | 1 X 10 A / 30 VDC |
| Output circuit power of AC output (resistive load): | 2300 W (230 VAC) |
| Output circuit power of DC output (resistive load): | 240 W (24 VDC) |
| Accuracy of the power measurement: | n / a |
| Digital temperature sensor range: | -50 ° ~ + 125 ° C, resolution 0.1 ° C |
| Cable length of the digital temperature sensor: | 1000 mm |
| Operating Temperature: | -10 ° ~ + 40 ° C |
| Distance | up to 30 m indoors (depending on materials) |
| Dimensions (WxHxD) | 41.8 x 36.8 x 15.4 mm |
| (packaging) | (115 x 96 x 22) |
| Weight (including packaging) | 48 g (64 g) |
| Electric consumption on standby | 0.4 W |
| For installation in mechanism boxes | Ø e 60 mm or 2 M |
| Switching by: | Relay |
Download
Extended Z-Wave info
Manual download HERE.
• Connect module to power supply (with
temperature sensor connected - if purchased),
• auto-inclusion (works for about 5 seconds after connected to power supply) or
• press service button S for more than 2 second or
• press push button I1 three times within 3s (3 times change switch state within 3 seconds).
NOTE: When connecting temperature sensor to module that has already been included, you have to exclude module first. Connect the sensor and re-include the module.
• Connect module to power supply
• bring module within maximum 1 meter (3 feet) of the main controller,
• enable add/remove mode on main controller
• press service button S for more than 6 second or
• press push button I1 five times within 3s (5 times change switch state within 3 seconds) in the first 60 seconds after the module is connected to the power supply.
By this function all parameters of the module are set to default values and own ID is deleted
If service button S is pressed more than 2 and less than 6 second module is excluded, but configuration parameters are not set to default values.
If the service button S is pressed for more than 6 seconds the module will be reset to the factory defoult state.
Reviews
Rele para riego ideal
Rele con multiples parametros para evitar problemas de sobre riegos, etc. Me llego rapido y me explicaron todo bien,
Contacto seco
De lo mas polivalente. Sirve para todo. Ja ja
Muy versátiles
Los he utilizado para controlar electroválvulas de riego a 24v AC junto a un transformador y van genial
