No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
HANK LED Bulb RGB technology Z-Wave Plus
HNKERGB01
New
The Z-Wave LED bulb RGB for conventional socket E27 (the "fat" cap) of all life.
Out of stock
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Technical characteristics
| Home Automation Technology | Z-Wave Plus |
More info
Bring color to your life and create a personal comfortable atmosphere with white and colored dimmable tones. The Hank RGB LED bulb fits into each E27 bulb holder and can be connected to a smart home center through Z-Wave wireless technology just after screwing. The required radio chip is already integrated into the bulb housing. Through the remote control, smartphone or tablet you can vary the brightness and the color of the light as well. Daylight, candlelight or party mood: From now on, you can define a light atmosphere according to your wishes or use scenes (for example, in case of an alarm) activating the appropriate light color.
As a special function, the color of the Hank bulb light can be adjusted completely without using a smartphone application. Only control it by the existing wall switch. Through the combination of ON / OFF on the wall switch, the bulb will enter a fade mode and is dimmed through all the main colors. Once you have found the color you like, select it by turning the bulb on / off again. Then the fade mode will stop and the bulb will remain in the current color mode.
Due to LED technology, the power consumption is very low compared to conventional bulbs. Hank's bulb is as bright as a conventional 60W bulb, but it only needs 7W.
characteristics:
Lamp for cap type E27
Integrated radio chip
Colors: 3-channel RGB, 16 million colors, warm and cool white
Power consumption: max. 7 W
Intensity of light: 600 lm
Energy efficiency class: A +
Wireless technology: Z-Wave Plus
Dimensions: 115x65x65 mm
Extended Z-Wave info
Manual download HERE.
(1) Screw in the RGB BULB.
(2) Set the Z-Wave network main controller into excluding mode
(see Z-Wave controller operating manual).
(3) Toggle the wall switch off and on 3 times quickly(within 3
and the final ending position of the wall switch must be on),
if the exclusion is successful, the RGB BULB will blink fast in
orange for less than 5 seconds and then keep on for 3 seconds.
RGB BULB will keep on warm white after the exclusion procedure
is finished.
RGB BULB from the Z-Wave network, the other is that using the
configuration command class.
(1) Make sure the power supply is disconnected and the RGB BULB is
located within a direct Z-Wave network's main controller
communication range.
(2) Set the Z-Wave network main controller into learning mode
(see Z-Wave network controller operating manual).
(3) Insert the RGB BULB into a lamp-socket and then power on.
(4) Auto-inclusion will be activated. If the inclusion is successful, the
RGB BULB will blink fast in blue for less than 5 seconds and then
keep on for 3 seconds. RGB BULB will keep on in the color before it
is included into the Z-Wave network after the inclusion procedure
is finished.
To include RGB BULB into a Z-Wave network as a security device:
(1) Screw in the RGB BULB.
(2) Set the Z-Wave network main controller into learning mode
(see Z-Wave network controller operating manual).
(3) Toggle the wall switch off and on 3 times quickly (within 3 seconds
and the final ending position of the wall switch must be on).
(4) If the inclusion is successful, the RGB BULB will blink fast in green
for less than 5 seconds and then keep on 3 seconds. RGB BULB will
keep on in the color before it is included into the Z-Wave network
after the inclusion procedure is finished.
Reviews
Bombilla económica
Económica y práctica. Muy útil para avisarte del disparo de una escena o para avisarte de si algo ocurre
