HANK 4-Button Z-Wave + Scene Controller

Technical characteristics

Home Automation Technology	Z-Wave Plus

More info

4-button Z-Wave + scene controller

The Hank Z-Wave + scene controller is a wireless, portable and rechargeable device. You can control Z-Wave devices, such as a smart plug or smart dimmer after being included in a Z-Wave controller. You can also use it to activate scenes.

This scene controller can perform 3 different actions per button, depending on the type of support: short press, sustained support, released support.

When operating with a rechargeable battery with a range of 3 to 6 months, it will be very easy to recharge it by connecting a USB cable to its micro-USB port. It is not necessary to change the batteries! In addition, this scene controller is equipped with a buzzer that will alert when the battery is low (less than 20%) or when communication has failed.

An RGB LED is present to provide visual information. This scene controller is also equipped with the Z-Wave range test function.

You need a Z-Wave controller (remote control, dongle ...) to integrate this module into your network if you already have an existing network.

FUNCTIONS:

Z-Wave + scene controller
Control up to 3 devices / scenes per button
Z-Wave range test function
Rechargeable battery
Low battery warning and communication error (through the buzzer)
Security of radio communication through AES-128 encryption
Integrates the chip of the Z-Wave 500 series
Firmware updates by air (OTA)
Ease of use and installation

TECHNICAL CHARACTERISTICS :

Module type: Transmitter of the Z-Wave + 500 series
Power supply: rechargeable battery 3.6V LIR2450
Standby power consumption: 3uA
Operating power consumption: 36mA
Frequency: 868.42 Mhz
Transmission distance: 100 m in free field, 30 m in indoor
Dimensions: 50 x 50 x16 mm
Operating temperature: 0 ° C to 40 ° C
Certifications: FCC, CE, Z-Wave
Z-Wave certification number: ZC10-16095219

Extended Z-Wave info

Name: Scene Controller

Manufacturer:Hank

Identifier:HKZW-SCN04

Z-Wave Certification Number:ZC10-16095219

Hardware Plattform:ZM5101

FLiRS:NO

Role Type:Portable Slave

Short Description:The Scene Controller is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway.

Description:The Scene Controller is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway. You can also activate a scene like sleep scene, movie scene and entertainment scene with it.

Manual download HERE.

Group

Max Nodes

Description

1

5

Scene Controller will send the central scene notification command and battery report command to the associated nodes if any button is triggered.

2

5

Scene Controller will send Basic Set command to the associated nodes if button 1 is pressed.

3

5

Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 1 is pressed, hold and released, respectively.

4

5

Scene Controller will send Basic Set command to the associated nodes if button 2 is pressed.

5

Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 2 is pressed, hold and released, respectively.

6

5

Scene Controller will send Basic Set command to the associated nodes if button 3 is pressed.

7

5

Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 3 is pressed, hold and released, respectively.

8

5

Scene Controller will send Basic Set command to the associated nodes if button 4 is pressed.

9

5

Scene Controller will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 4 is pressed, hold and released, respectively.

Number

Size (Bytes)

Default Value

Name

Description

254

1

0

Enable/disable the configuration command

Lock/unlock all configuration parameters.

255

4

0

Reset Scene Controller

Reset Scene Controller and remove from the Z-Wave network

Basic

COMMAND_CLASS_BASIC

Battery

COMMAND_CLASS_BATTERY

Central Scene V2

COMMAND_CLASS_CENTRAL_SCENE_V2

Switch Multilevel V2

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Battery

COMMAND_CLASS_BATTERY

Central Scene V2

COMMAND_CLASS_CENTRAL_SCENE_V2

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V2

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Version V2

COMMAND_CLASS_VERSION_V2

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Controller Exclusion

To remove the Scene Controller from the Z-Wave network:

(1) Insert the LIR2450 battery.

(2) Set the Z-Wave network main controller into remove mode

(see Z-Wave controller operating manual).

(3) Triple click the a button, if the exclusion is successful, LED

will blink in orange for less than 5 seconds and then keep on

for 3 seconds.

Controller Inclusion

Included as non-secure device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode( see Z-Waave network controller operating manul).

3. Triple click a button.

4. If the inclusion is successful, the LED will blink in blue less than for 5 seconds and then keep on for 15 seconds.

Included as a secure device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode( see Z-Wave network controller operating manual).

3. Pressing and holding a button for 3 seconds.

4. If the inclusion is successful, the LED will blink in green less than for 5 seconds and then keep on for 15 seconds.

Factory Reset

Pressing and holding a button for 20 seconds. Release the button after 20 seconds, LED will keep in yellow for 3 seconds. Scene Controller will be reset to factory defaults if you short press the button within this 3 seconds.

Using this procedure only in the event that the network primary controller is missing or otherwise inoperable.

Device Wake-Up

Pressing and holding a button for 3 seconds. Led will turn to green,

which means Scene Controller has been woken up.

Battery Quantity

Enter the number of batteries of the designated type that the product uses.

Z-Wave Scene Type

Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

Battery Type

Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.