ZIPATO KNX Module for ZIPABOX

Control a KNX installation from your Zipato Zipabox!
The KNX expansion module for Zipabox is a simple solution for the integration of the KNX protocol. The device is compatible with the BAOS protocol for data access points. This allows KNX devices to fully integrate into a Zipato system network through the standard KNX bus.
By adding support for the Zipabox KNX network, the user can connect any compatible KNX device and combine them with all existing devices in the network, regardless of the protocol. The KNX module is used mainly by advanced users to add more device options and increase the number of devices that can be controlled by Zipabox.
The KNX module is plugged into the Zipabox expansion connector (slot 2 or the expansion module connected to slot 2).

CHARACTERISTICS:
Expansion module for Zipabox
Add support for the KNX protocol
bidirectional comunciation (devices report your status)
KNX can control up to 250 devices


TECHNICAL CHARACTERISTICS :
electrical safety
Protection class (EN 60529): IP 20
low voltage safety very low voltage 30 V DC
Galvanic 2.5 kV DC insulation
EMC conditions
Complies with EN 50090-2-2 and CE EN 50491-5-2
Complies with EMC (residential and functional buildings) and the low voltage directive
KNX
environmental conditions
Operating ambient temperature: - 5 ... + 45 ° C
Storage ambient temperature: - 25 ... + 70 ° C
Relative humidity (without condensation): 5% ... 93%
mechanical properties
Plastic box
Mounting on DIN rail device, width: 18 mm
Weight: 45 g
LED indicator (green) and power connection for KNX
electric specifications
Power supply: KNX bus.
Consumption: approx. 10 mA
Connectors
KNX connector: KNX
Zipabox: Connection of slot connector 2 on the Zipabox
protocol
UART (19.2 kbit / s, 8 data bits, no parity, 1 stop bit)
Frame size: FT1.2 (IEC 870-5-1 and 870-5-2)
EMI2 telegrams protocol
Protocol data points: Binary BATHS V1
Up to 250 group objects and parameters 250