WiDom Smart Dry Contact Switch - micro-module Z-Wave + dry contact relay

The Smart Dry Contact Switch WiDom allows you to turn on and off devices that have an independent power supply, solenoid valves, or servos, such as gas valves and irrigation systems. It also allows you to monitor consumption and find out, for example, how much solar-powered garden lights consume. Small and energy efficient, this device is a real trump card for all those looking for the ideal solution to manage their home with peace of mind.

Gas valve connection / disconnection

Connection / disconnection of irrigation systems

Activation of scenes

WiDom Smart Dry Contact Switch
The features that make it special.

BIG AND SMALL AT THE SAME TIME
"Switchgear with independent power supply on and off
"You can trigger a specific scene with one or two clicks by sending a script to the controller.
"Control of other devices included in the Z-Wave network by association

INTELLIGENT AND COLLABORATIVE
"Inclusion and exclusion made easy, even from the device
"Timed management, both inside and outside the company.
"Ready to install, but fully configurable

The smallest Z-Wave devices in the world
Our plug & play modules fit into any type of junction box and are easier to install.

EASY TO CONTROL
They can be operated with buttons or switches, from computers, tablets or smartphones, depending on the needs of the moment.

VISUAL FEEDBACK WITH RGB LEDs
An RGB LED provides visual information on its status and on the status of operations in progress. In this way, you always know if the device has been connected correctly, if it is included in the Z-Wave network and if it is working.

Long life
Zero crossing reduces the electrical voltage of the relay contacts and ensures a longer service life of the devices.

Protection and security
WiDom devices use an S2 security system, with advanced encryption, which provides advanced security features and eliminates the risk of hacking.

Savings - Low energy consumption
WiDom devices have the lowest power consumption among similar devices on the market.

Easy Installation - Simplified Inclusion and Exclusion
Z-Wave network inclusion / exclusion can be initiated not only by the controller, but also by the device with any sequence of clicks on the integrated button.

Easy installation - Test electrical connections
Before pairing the device with the help of the built-in button and LED, you can check whether the electrical connection has been made correctly

Multiclic recognition
Control of local load and associated devices independently of the recognition of the click sequence. For example, you can control local loads with a single click and associated devices with a double click.

Technical characteristics
Power supply: 230 VAC ± 10% 50/60 Hz
Maximum load: 13A resistive load
Temperature limit: 105 ° C
Working temperature: -10 ° to 40 ° C
Radio protocol: Wave Z 868.4 MHz
Maximum distance: up to 100m outdoors - up to 40m indoors
Dimensions: 37x37x17 mm
Consumption: <1 watt
Actuating Element: 16 Amp Relay
Compliance: CE, RoHs
Degree of protection: IP20

Other specifications:

Software update - You can update device firmware "Over the Air" in complete autonomy without removing the devices from their physical location.