Viewed products

FIBARO Roller Shutter...

Blinds and awnings controller....

Reduced price! FIBARO Roller Shutter 4 - Micromodulo Z-Wave Serie 800 para el control de persiana y toldos

View larger

FIBARO Roller Shutter 4 - Z-Wave Micromodule Series 800 for controlling blinds and awnings

Reference FGR-224

Condition: New

Blinds and awnings controller. Installation has never been easier. The Roller Shutter 4 from Fibaro will allow you to control blind motors with electronic and mechanical limit switches, Venetian blinds or even garage doors and chain motors for windows, curtains...

More details

In Stock

Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

Technical characteristics

Technology	Z-Wave Serie 800

More info

Reliable design, advanced technology and even better:

the new FIBARO Roller Shutter 4 !

The FIBARO Roller Shutter 4 - equipped with the Z-Wave 800 chip - is a device designed to control roller shutters, awnings, blinds, curtains and pergolas. The roller blind allows precise positioning of the roller blinds or blind slits. The device is equipped with power control. Allows you to control connected devices through the Z-Wave network or a directly connected switch.

FIBARO has focused on ease of installation and an intuitive initial design. It has more entries for N and L cables, so it is not necessary to use connection terminals. The shape and dimensions of the device allow for easy and quick installation in flush-mounted boxes. The button and the diode are easily accessible. Equipped with plug-in connectors, it allows for even faster installation, without the need for a screwdriver. Three additional connection cables are included to connect the switch. The integrated jumper offers a simple bridging option for phase and neutral. It is not necessary to use Wago connectors to connect the cables. You will save space in the box and reduce installation time thanks to the push-in connection of the cables.

FIBARO ROLLER SHUTTER 4 is a device designed to control awnings, canopies, venetian blinds, curtains and pergolas. FIBARO ROLLER SHUTTER 4 allows you to precisely position awnings or Venetian blinds slats. The device is equipped with power control. You can control connected devices via the Z-Wave network or via a switch connected directly to it.

New design

FIBARO has focused on easy installation and intuitive initial use. There are more entries for the N and L wires, eliminating the need for branch connectors (Wago terminal blocks).

Smaller device

The shape and dimensions of the device make it easy and quick to install in built-in boxes. The button and the diode are easily accessible.

Equipped with pluggable connectors

Allows even faster assembly, without the need to use a screwdriver.

3 additional connection cables included in the box

Additional cables are included to connect the switch.

Integrated bridge

Easy option to bridge current and neutral. It is not necessary to use Wago connectors to connect the cables. Save box space and shorten installation time with the snap-on connector.

Extended Z-Wave info

Name: Roller Shutter 4

Manufacturer:FIBAR GROUP S.A.

Identifier:FGR-224

Z-Wave Certification Number:ZC14-23120375

Hardware Plattform:EFR32ZG23B

FLiRS:NO

Role Type:Always On End Node

Short Description:FIBARO ROLLER SHUTTER 4 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas.

Description:FIBARO ROLLER SHUTTER 4 is a device designed to control roller blinds, awnings, venetian blinds, curtains and pergolas.

Group

Max Nodes

Description

Number

Size (Bytes)

Default Value

Name

Description

150

Force calibration

151

Operating mode

152

Time of full turn of the slats

156

600

Time of up movement

157

600

Time of down movement

158

Virtual limit switch

159

Favorite roller blind position

160

Favorite slats position

Switch type

Buttons orientation

Outputs orientation

First button - scenes sent

Second button - scenes sent

Application Status

COMMAND_CLASS_APPLICATION_STATUS

Association Group Information (AGI) V3

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic V2

COMMAND_CLASS_BASIC_V2

Central Scene V3

COMMAND_CLASS_CENTRAL_SCENE_V3

Configuration V4

COMMAND_CLASS_CONFIGURATION_V4

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta Data V5

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Indicator V3

COMMAND_CLASS_INDICATOR_V3

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Meter V3

COMMAND_CLASS_METER_V3

Multi Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Multilevel Switch V4

COMMAND_CLASS_SWITCH_MULTILEVEL_V4

Notification V8

COMMAND_CLASS_NOTIFICATION_V8

Powerlevel

COMMAND_CLASS_POWERLEVEL

Protection V2

COMMAND_CLASS_PROTECTION_V2

Security 0

COMMAND_CLASS_SECURITY

Security 2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V3

COMMAND_CLASS_VERSION_V3

Window Covering

COMMAND_CLASS_WINDOW_COVERING

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Where to find S2 DSK on product

Enter the full DSK string code to your controller. If your controller is capable of QR scanning, scan the QR code placed on the label on the bottom of the box.

Classic Inclusion

To add the device to the Z-Wave network manually:

1. Power the device.

2. Identify the PROG button or the S1/S2 switches.

3. Set the main controller in (Security/non-Security Mode) add

mode (see the controller’s manual).

4. Quickly, click PROG button three times. Optionally, click S1 or S2

three times.

5. If you are adding in Security S2 Authenticated, input the PIN

Code (label on the device, also underlined part of the DSK on t he

label on the bottom of the box).

6. Wait for the LED indicator to blink yellow.

7. Successful adding will be confirmed by the Z-Wave controller’s

message and the device’s LED indicator:

• Green – successful (non-secure, S0, S2 non-authenticated),

• Magenta – successful (Security S2 Authenticated),

• Red – not successful.

Classic Exclusion

Removing (Exclusion) – Z-Wave device learning mode, allowing to

remove the device from existing Z-Wave network.

To remove the device from the Z-Wave network:

1. Make sure the device is powered.

2. Identify the PROG button or the S1/S2 switches.

3. Set the main controller in remove mode (see the controller’s

manual).

4. Quickly, click PROG button three times. Optionally, click S1 or S2

three times within 10 minutes of powering up the device.

5. Wait for the removing process to end.

6. Successful removing will be confirmed by the Z-Wave controller’s

message and the device’s LED indicator - Red.

7. Removing the device from the Z-Wave network doesn’t cause

factory reset.

Factory Reset Procedure

Reset procedure allows to restore the device back to its factor y

settings, which means all information about the Z-Wave controller

and user configuration will be deleted.

1. Switch off the mains voltage (disable the fuse).

2. Remove the device from the wall switch box.

3. Switch on the mains voltage.

4. Press and hold the PROG button to enter the menu.

5. Wait for the LED indicator to glow yellow.

6. Quickly release and click the PROG button again.

7. During the factory reset, the LED indicator will blink yellow.

8. After few seconds the device will be restarted, which is signal led

with the red LED indicator colour.

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED