No products
Prices are tax included
EWS356-FIT
New
EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point. Indoor access point speeds up to 574 Mbps on 2.4 GHz and 2400 Mbps on 5 GHz
Simple "Secure" Smart "1800Mbps Wi-Fi 6" Cloud & On-Prem
In Stock
PoE | Si (Power Over Ethernet) |
The EnGenius EWS356-FIT Wi-Fi 6 2x2 Wireless Access Point, with Cloud Management and On-Prem, is an enterprise-class device that provides high-quality, secure and reliable performance while reducing capital and operational expenses. for small businesses.
With support for the latest 802.11ax technology, this access point can deliver maximum speeds of 574 Mbps (2.4 GHz) and 1200 Mbps (5 GHz). Additionally, it features an intuitive web interface for cloud or on-premise management options based on network architecture and technical capacity.
Features and Highlights
" Dual concurrent 802.11ax architecture and compatible with 11ac/a/b/g/n client devices; 2x2 antenna.
" Supports up to 1,200 Mbps in the 5 GHz frequency band and 574 Mbps in the 2.4 GHz frequency band.
"Cloud or On-Prem (on-premises) management options based on network architecture and administrative permissions.
"Visibility and control in the cloud from anywhere.
"Setup in minutes with step-by-step instructions through an application and/or Cloud Web.
"Quick device registration, remote monitoring and troubleshooting. Registration by S/N or QR
"Real-time system metrics, analysis and remote configurations.
"No cost for access point licenses or subscription fees.
" OFDMA uplink and downlink improves transmission to access points and client devices.
"Target activation time for energy saving of client and IoT devices.
" MU-MIMO uplink and downlink for optimal signal and reception reliability for up to 2 devices.
"BSS coloring to label packets with a "color" to differentiate between adjacent basic service sets.
"Spatial reuse identifies sets of colors through BSS coloring and transmits simultaneously on the same channel,
reducing wait time and transmission contention.
" GigE PoE compliance with 802.3at and 48V PoE input for flexible installation up to 328 feet.
" Wireless Mesh support that simplifies setup, optimizes signals, and self-heals.
Must be powered via PoE (Ethernet), no AC adapters included.
Standards
IEEE 802.11ax at 2.4 GHz
IEEE 802.11ax at 5 GHz
Backwards compatible with 802.11a/b/g/n/ac
Processor
Qualcomm® Quad-Core CPU ARM Cortex A53s @ 1.0GHz
Antenna
2 x 2.4 GHz: 4 dBi
2 x 5 GHz: 5 dBi
Integrated omnidirectional antenna
Physical interface
1 x 10/100/1000 BASE-T, RJ-45 Ethernet port
1x DC Jack
1 x reset button
LED indicators
1 x power
1 x LAN
1 x 2.4GHz
1 x 5GHz
Power supply
Power over Ethernet: 802.3af input
12VDC /1.5A
Maximum power consumption
12.8W
Operating Frequency
Concurrent dual radio 2.4 GHz and 5 GHz
Modes of operation
AP, mesh
frequency radio
2.4GHz: 2400MHz ~ 2482MHz
5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz
Transmission power
Up to 21 dBm at 2.4 GHz
Up to 21 dBm at 5 GHz
Tx Beamforming (TxBF)
Radio chains/space stream
2x2: 2
SU-MIMO
Two (2) SU-MIMO spatial streams for 2.4 GHz and two (2) SU-MIMO spatial streams for 5 GHz with a wireless data rate of up to 2974 Mbps to a single 11ax wireless client device on 2. 4 GHz and 5 GHz.
MU-MIMO
Two (2) multiple spatial (MU)-MIMO streams for up to 2400 Mbps wireless data rate to transmit to one (1) two streams of 11ax MU-MIMO capable wireless client devices below 5 GHz simultaneously.
Two (2) multiple (MU)-MIMO for up to 574 Mbps wireless data rate to transmit to one (1) two streams of 11ax 2.4 GHz MU-MIMO capable wireless client devices simultaneously.
Supported data rates (Mbps):
802.11ax:
2.4 GHz: 9 to 574 (MCS0 to MCS11, NSS = 1 to 2)
5 GHz: 18 to 2400 (MCS0 to MSC11, NSS = 1 to 2)
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)
Supported radio technologies
802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)
802.11b: Direct Sequence Spread Spectrum (DSSS)
802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM)
Canalization
802.11ax supports high efficiency (HE): HE 20/40/80/160 MHz
802.11ac supports very high throughput (VHT): VHT 20/40/80 MHz
802.11n supports high throughput (HT): HT 20/40 MHz
802.11n supports very high performance under 2.4GHz VHT40 MHz (256-QAM) radio
802.11n/ac/ax Packet Aggregation: A-MPDU, A-SPDU
Modulation supported
802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11b: BPSK, QPSK, CCK
Multiple BSSID
8 SSIDs for 2.4GHz and 5GHz radios.
VLAN tagging
Supports 802.1q SSID to VLAN tagging
Crossband VLAN Passthrough
Management VLAN
spanning tree
Supports 802.1d Spanning Tree protocol
QoS (quality of service)
Complies with IEEE 802.11e standard
WMM
SNMP
v1, v2c, v3
MY B
I/II, private MIB
Wireless security
WPA3
WPA2 Enterprise (AES)
WPA2 AES-PSK
Hide SSID in beacons
MAC address filtering, up to 32 MAC per SSID
STA Wireless Connection List (Client)
SSH tunnel
Client isolation
Temperature range
Operating: 32ºF ~ 104ºF (0 ºC ~ 40 ºC)
Storage: -40 ºF ~ 176 ºF (-40 ºC ~ 80 ºC)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
EWS356-FIT device
Weight: 0.83 lbs. (380 grams)
Length: 6.30" (160mm)
Width: 6.30" (160mm)
Height: 1.31" (33.2mm)
Packaging EWS356-FIT
Weight: 1.28 lbs. (580g)
Length: 8.07" (205mm)
Width: 8.07" (205mm)
Height: 3.27" (83mm)
package contents
1 - EWS356-FIT Cloud Managed Indoor Access Point
1 - Ceiling Mount Base (9/16" Trail)
1 - Ceiling Mount Base (15/16" Trail)
1 - Ceiling and Wall Mounting Screw Kits
Quick Start Guide QR Code
Mobile app QR code
Certifications
FCC
EC
I.C.
Warranty
1 year