Qubino Luxy Smart Light - Z-Wave smart light with light and sound

Technical characteristics

Home Automation Technology	Z-Wave Plus

More info

Qubino Luxy Smart Light is an innovative light source that softly illuminates in 16 million colors and has a built-in beeper.

It can be used independently, as an ambient light, or as a smart home device. Thanks to the integrated beeper, it allows a unique combination of audible and visual notifications.

Feel free to create different scenarios and times to turn it on and off and add a personal touch to any room.

What can Luxy Smart Light do?

Control it with one hand, through 5 touch-sensitive points integrated into the surface
Turn the Luxy light on and off and cycle through the 16mio color spectrum.
Set one of the 4 lighting effects
Set a schedule to turn the Luxy Smart Light on and off and change the color *
Get visual notifications of LEDs and sounds through Luxy Smart Light at the time of different events from other Smart Home devices such as movement, doorbell or flood alarm *.
* Only in connection with a Z-Wave home automation controller *

Features:

16 million colors of LED lighting
fits in normal wallboxes
switching via integrated touch panel switches
control manually or wirelessly via Z-Wave Plus
Z-Wave S2 and SmartStart
Sound level: 80 dB at 5 cm distance
Input: 110-240V
Standby power: 0.5W; Maximum power consumption: 1.5W

Note 1: It is a smart light to be installed in an electrical installation box.

Note 2: It does not support the control and connection of other light load.

Note 3: You can only control the lighting of this device by touch or Z-Wave - set colors, scenes, dim and off.

Qubino LUXY Smart Light
Qubino LUXY Smart Light is the only LUXY Smart Light in the world with a built-in beeper and can be transformed into our custom alarm. The beeper can be triggered by other connected devices, such as a flood detector, a motion sensor, a leak detector, etc. In the event of an intrusion or water leak, the LUXY Smart Light will visually alert you with a color flash (you can choose from 16 million colors) and / or a loud audible alarm.

Qubino LUXY Smart Light is the only Smart Light in the world that can be controlled either manually through 4 hidden capacitive inputs that are designed in such a way that they do not interfere with the light source or wirelessly with a simple touch on its smartphone (via Z-Wave).

Qubino LUXY Smart Light is the only Smart Light in the world that can be pre-programmed according to your needs. For example, it can be pre-programmed to automatically turn on when the motion sensor detects motion. It can also be programmed to turn on or off at any specific time.

Qubino LUXY Smart Light comes with pre-programmed nature-inspired lighting effects: Ocean, Rainbow, Nature, and Sunrise that will ensure a relaxing lighting experience to help you start the day with more energy or to calm you down after a hard day.

Qubino LUXY Smart Light is the only Smart Light in the world that has an adjustable frame. You have the option of choosing between plastic and natural materials such as wood or glass.

The most outstanding
It presents one of the easiest and fastest installations of devices of this type
Install it wherever you want (corridor, staircase, bathroom, WC, bedroom, living room, garage, terrace, etc.)
Modern and minimalist design
You can choose from 16 million colors to suit your personal preference
Energy efficiency
Save and restore the last state after a power outage
Supports SmartStart mode for quick setup
Supports additional parameters for expert users, allowing advanced configuration
It acts as a signal repeater that improves the range and stability of your Z-Wave network.
Can be activated by another Z-Wave device
Technical specifications
Power supply: 100 - 240 VAC ± 10% 50 or 60Hz
Operating temperature: -10 ~ + 40 ° C (14 ~ 104 ° F)
Z-Wave operating range: up to 310m indoors.
Beeper:> 60dB
Colors: 16 million
Electricity consumption: <1W
Installation in boxes: Ø e 60 mm / 2M or 3M
Z-Wave repeater: Yes
Dimensions (Width x Height x Depth): 93x90x45mm / 3.7x3.5x1.8
Weight (with wooden frame): 114 g
Weight (with plastic frame): 143 g

Item Dimensions (Width x Height x Height) 93 x 90 x 48mm
Package Dimensions (Width x Height x Height) 150 x 137 x 52mm
Net weight of the article 0.141 Kg.
Gross weight of the article 0.216 Kg.
Z-Wave Plus
Z-Wave S2
WEEE
EC
IP20 rating

Extended Z-Wave info

Name: Luxy Smart Light

Manufacturer:QUBINO

Identifier:ZMNHQD1

Z-Wave Certification Number:ZC10-20096982

Hardware Plattform:ZM5101

FLiRS:NO

Role Type:Always On Slave

Short Description:Luxy Smart Light is an innovative light source that gently illuminates in more than 16 million colours and easily fits into places of your light switch or socket.

Description:Luxy Smart Light is an innovative light source that gently illuminates in more than 16 million colours and easily fits into places of your light switch or socket. It can be used standalone, as ambient light, or as a smart home device. With an integrated beeper, it enables a unique combination of sound and visual notifications. It can be controlled with a touch on one of the 4 sides on the touch-sensitive surface (or touch screen) or remotely via a smartphone. It can be set to work automatically, according to the pre-programmed scenes, created on the Z-Wave gateway. Set the Luxy Smart Light as a visual alarm, for a gentle wake-up, with colours simulating the sunrise or illuminate your corridor in the night-time, so you don’t have to turn on the main light or stumble in the dark.

Manual download HERE.

Group

Max Nodes

Description

1

COMMAND_CLASS_DEVICE_RESET_LOCALLY, DEVICE_RESET_LOCALLY_NOTIFICATION, COMMAND_CLASS_SWITCH_MULTILEVEL_V4, SWITCH_MULTILEVEL_REPORT_V4, COMMAND_CLASS_SWITCH_COLOR_V3, SWITCH_COLOR_REPORT_V3, COMMAND_CLASS_NOTIFICATION_V8, NOTIFICATION_REPORT_V8, COMMAND_CLASS_SOUND_SWITCH, SOUND_SWITCH_TONE_PLAY_REPORT

2

5

COMMAND_CLASS_BASIC_V2, BASIC_SET_V2

3

5

COMMAND_CLASS_SWITCH_MULTILEVEL_V4, SWITCH_MULTILEVEL_SET_V4

4

5

COMMAND_CLASS_SWITCH_COLOR_V3, SWITCH_COLOR_SET_V3

Number

Size (Bytes)

Default Value

Name

Description

1

Parameter no. 1 – Digital input type

Defines the input type of device connected to digital input. Values (size is 1-byte dec): • Default value 1 • 0 – Push-button • 1 – ON/OFF toggle switch • 2 – motion sensor • 3 – motion sensor with memory (turned off after certain amount of time defined in parameter 5)

10

2

0

Parameter no. 10 – Auto on timer

Defines the time after which the device is turned to last known state. Values (size is 2-byte dec): • Default value 0 • 0 – disabled • 30 – 32535 = 30 – 32535 seconds after which the device turns on ⓘ NOTE: If the user is performing an inclusion/exclusion/factory reset of this device and this parameter is configured to a non-default value, a change of output state can occur. This will result in an interruption of the inclusion/exclusion/reset process.

11

2

30

Parameter no. 11 – Auto off timer

Defines the time after which the device is turned to last known state. Values (size is 2-byte dec): • Default value 0 • 0 - disabled • 30 – 32535 = 30 – 32535 seconds after which the device turns off ⓘ NOTE: If the user is performing an inclusion/exclusion/factory reset of this device and this parameter is configured to a non-default value, a change of output state can occur. This will result in an interruption of the inclusion/exclusion/reset process.

3

1

Parameter no. 3 – Turning off alarming

Values (size is 1-byte dec): • default value 1 • 0 – only by z-wave command (basic set, switch multilevel set, switch multilevel start/stop level change, sound switch play tone, sound switch configuration, switch color set, switch color start/stop level change, notification report idle) • 1 – capacitive input or z-wave command (basic set, switch multilevel set, switch multilevel start/stop level change, sound switch play tone, sound switch configuration, switch color set, switch color start/stop level change, notification report idle)

30

1

Parameter no. 30 – Restore state on power failure

Values (size is 1-byte dec): • Default value 1 • 1 – enabled (the device will restore state on power failure) • 0 – disabled (the device will not restore state on power failure and will remain off)

5

2

10

Parameter no. 5 – Motion sensor memory timer

Defines the time after which the output triggered by motion sensor is turned off. Values (size is 2-byte dec): • default value 10 • 0 – 32534 = 0-32534 seconds after which the LED will be turned off. • 32535 – never turns off

50

1

Parameter no. 50 – Beeper enable/disable

This parameter affects beeper function just in case when the device receives the NOTIFICATION_REPORT. If the user sends a SOUND_SWITCH_TONE_PLAY_SET (1), the buzzer still emits a serviceable tone. Values (size is 1-byte dec): • Default value 1 • 0 – disabled (the beeper is not active) • 1 – enabled (the beeper is active)

Basic V2

COMMAND_CLASS_BASIC_V2

Switch Color V3

COMMAND_CLASS_SWITCH_COLOR_V3

Switch Multilevel V4

COMMAND_CLASS_SWITCH_MULTILEVEL_V4

Association Group Information V3

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic V2

COMMAND_CLASS_BASIC_V2

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Notification V8

COMMAND_CLASS_NOTIFICATION_V8

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Sound Switch

COMMAND_CLASS_SOUND_SWITCH

Supervision

COMMAND_CLASS_SUPERVISION

Switch Color V3

COMMAND_CLASS_SWITCH_COLOR_V3

Switch Multilevel V4

COMMAND_CLASS_SWITCH_MULTILEVEL_V4

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V2

COMMAND_CLASS_VERSION_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Classic Inclusion

MANUALLY ADDING THE DEVICE TO A Z-WAVE NETWORK (MANUAL INCLUSION)

1. Enable add/remove mode on your Z-Wave gateway (hub).

2. Connect the device to the power supply.

3. Make sure the device is within direct range of your Z-Wave gateway (hub).

4. Press once on button 2 – right. One press on button 3 – down for enabling full white. When full white is enabled, press, and hold button 2 – right, between 4 and 6 seconds. After 6 seconds, the device starts flashing green (1 second ON, 0.5 second OFF). Once the device receives node ID (after 10 seconds), it stops flashing and turns full green. The procedure is always available.

Classic Exclusion

12.3. Removing the device from a Z-Wave network (Exclusion)

1. Connect the device to the power supply.

2. Make sure the device is within direct range of your Z-Wave gateway (hub) or use a hand-held Z-Wave remote to perform exclusion.

3. Enable add/remove mode on your Z-Wave gateway (hub).

4. Press once on button 2 – right. One press on button 3 – down for enabling full white. When full white is enabled, press, and hold button 2 – right for 5 seconds. After 5 seconds, the device starts flashing red 1 second ON, 0.5 second OFF.

Once the device loses node ID (after 10 seconds), it stops flashing and turns full red. The procedure is always available.

NOTE1: LEARN MODE state allows the device to receive network information from the controller.

Factory Reset Procedure

12.4. Device factory reset

1. Connect the device to the power supply.

2. Press once on button 2 – right. One press on button 3 – down for enabling full white. When full white is enabled, press, and hold button 4 – left for 10 seconds. After 10 seconds, the device starts flashing blue 1 second on, 0.5 second off.

After 10 seconds the device stops flashing and turns full blue.

The procedure is always available.

ⓘ By factory resetting the device, all custom parameters previously set on the device will return to their default values, and the node ID will be deleted. Use this reset procedure only when the main gateway (hub) is missing or otherwise inoperable.

Where to find S2 DSK on product

MPORTANT: When adding the LUXY Smart Light to a Z-Wave network with a controller supporting Security 2 (S2), the PIN code of the Z-Wave Device Specific Key (DSK) is required. The unique DSK code is printed on the product label and a copy is inserted in the packaging, which must not be lost. Do not remove the DSK from the product. As a backup measure, use the label in the packaging.

Color

If the product is only available in one color, pick the color from the list.

Neutral Wire Required

For electric in-wall/wired switches, indicate whether a neutral wire is required for installation.

Switch Type

Describes the type of operator for a switch.