Aeotec LED Strip Z-Wave Plus

Technical characteristics

Home Automation Technology	Z-Wave Plus

More info

Aeotec LED Strip Z-Wave Plus, the Z-Wave + LED strip from Aeotec

A strip of light to create the best atmosphere!

Illuminate a room with its 16 million shades of light. Or fill it with a perfect shade of white.

Z-Wave technology is designed to provide a smarter home. It is designed to create a perfect home.

The Aeotec LED strip allows you to decorate and fill a room with light. A strip with high quality LEDs that is manufactured with the technology and lighting experience that helped design the Aeotec LED bulb.

Based on Z-Wave technology, the LED panel allows your home to selectively find one of the 16 million light colors it offers. Program them, automate, vary, control them. This LED strip system takes Z-Wave lighting beyond the bulb.

White light

The light that fills our homes must be functional and beautiful. Panel Aeotec LED offers both in a single package to install. Offering dedicated shades of white light, the Aeotec LED strip was designed to reproduce both daylight and warm light. Aeotec LED panel offers more than just color; It exhibits perfect white tones for everyday life.

light-colored

The two perfect white tones in the Aeotec LED Strip are complemented by 16 million different colors of high quality light. Select them Illuminate them. Let them fill a room or corner. Paint your home a light that suits the mood and change everything to suit your mood.

A Z-Wave controller (remote control dongle ...) is necessary to integrate this module into your network if you already have an existing network. Each module works like a wireless Z-Wave repeater with other modules to ensure complete coverage of your home.

content :

- 1x LED Controller
- 2x screw
- 1x mounting bracket
- LED strip 1x 5 meters
- 1x adapter
- 1x double-sided tape

CHARACTERISTICS:

Z-Wave LED headband
Thousands of colors
integrated white LED
high quality white and fresh white color
adjustable brightness
Strip can be cut to size (between 1 and 5 m)
Security radio communications using AES-128 encryption
The Z-Wave 500 series chip is integrated
Communication 250% faster compared to standard Z-Wave devices
During air firmware updates (OTA)
Repeater messages Z-Wave
Optimized antenna range 150 meters
Ease of use and installation

TECHNICAL CHARACTERISTICS :

Module type: the Z-Wave receiver
Power supply: 24V / 3A DC (through the included adapter)
Max consumption Operating: 72W
Max consumption Standby: 1.2 W
Color temperature:
450 to 650K of RGB colors
3000 to 3500K for warm white
6500 to 8000K for fresh white
The luminous flux: up to 1100 lumens
color rendering index: 80
Frequency: 868.42 MHz
Transmission distance: 150 meters in open field
Operating temperature: 0-40 ° C
Operating humidity: 8-80%
Certifications: FCC, UL, CE, RoHS

Extended Z-Wave info

Name: LED Strip

Manufacturer:Aeotec

Identifier:ZW121-C

Z-Wave Certification Number:ZC10-16095245

Hardware Plattform:ZM5101

FLiRS:NO

Role Type:Always On Slave

Short Description:Aeotec LED Strip is a low-cost Z-Wave LED Strip module which allows control (on/off/dim) with the use of Z-Wave.

Description:Aeotec LED Strip is a multi-coloured LED Strip which allows control (on/off/dim/colour change) via wireless Z-Wave commands. The LED Strip can also communicate securely via AES 128 wireless Z-Wave commands and supports Over-The-Air (OTA) firmware upgrades.

Manual download HERE.

Group

Max Nodes

Description

1

5

The association group 1 is the Z-Wave Lifeline group. The Hail CC and Basic Report CC (configurable) can be sent to the associated nodes in association group 1.

2

5

In this group, the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Scene Activation Set commands would be sent to the associated nodes in association group 2 when the LED Strip receives the Basic Set, Switch Binary Set, Switch Multilevel Start Level Change, Switch Multilevel Stop Level Change, Switch Multilevel Set, Scene Activation Set commands from the main controller.

Number

Size (Bytes)

Default Value

Name

Description

112

1

0

Set the Dimmer mode.

20

1

Set the LED Strips state after it is re-powered on

Set the LED Strips state after it is re-powered on.

252

1

0

Enable/disable Lock Configuration

Enable/disable to lock Configuration parameters.

255

4

0

Reset the LED Strip

Reset the LED Strip to factory default.

32

1

0

Enable/disable to send out a report when the color is changed.

33

4

0

Get the LED strip’s color value.

Get the Bulb’s color value. Note: This parameter is a get-only parameter.

34

1

0

Enable/disable to turn on the last brightness level of the LED Strip when using the Color Switch Set CC to change its color.

35

1

Configure the display mode of Cold/Warm white.

36

1

0

Reboot/save/exit Colorful mode.

Reboot/save/exit Colorful mode. Note: This parameter is a set-only parameter.

37

4

157483008

Colorful mode configuration.

Configure the Colorful mode.

38

4

50332416

Change speed

Set the Change speed.

39

4

2003125025

Color index configuration when the LED Strip is in Multi color mode.

40

1

0

Colorful mode configuration.

80

1

To set whcih notification can be sent to the associated devices (Group 1) when the state of LED Bulb is changed.

Basic

COMMAND_CLASS_BASIC

Hail

COMMAND_CLASS_HAIL

Factory Reset

Press and hold the Action Button on the LED Strip Controller for 20 seconds and then release it.

Use this procedure only in the event that your primary network controller is missing or inoperable.

Additional Special Features

Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.

Inclusion

Turn the primary controller of Z-Wave network into inclusion mode, press the Action Button on the LED Strip Controller.

Exclusion

Turn the primary controller of Z-Wave network into exclusion mode, press the Action Button on the LED Strip Controller.

Color

If the product is only available in one color, pick the color from the list.

Z-Wave Scene Type

Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Switch Type

Describes the type of operator for a switch.

Reviews

Grade

David F. 07/13/2020

Magnifica tira LED

Lo tiene todo. No hay que volverse loco con la fuente de alimentación, las conexiones, soldaduras ni nada. Viene un kit completo con todo lo necesario para meterlo en la red z-wave y a correr. Muy contento por la sencillez.