LINCE CPlus cylinder for Danalock (5 keys)

Lince CPLUS SERIES Security Cylinder with PROGRAMMED BURST and Anti-Bumping, Anti-Picking and Anti-Drilling Protection

The new high security LINCE CPlus™ Euro profile cylinder series has been specially developed to ensure increased protection against the main methods of vandalism. Euro profile mechanical cylinder for the Danalock™ V3 motorised device. Includes 2 x 10mm and 1 x 5mm sockets to accommodate cylinder spacing, fixing screws and 5 mechanical keys. The CPlus™ cylinder system incorporates a new protection element. This is a cut line made at each end of the cylinder body, as a mechanical fuse or programmed break. Its purpose is to fracture the cylinder in the event of a breakage attack. In this way, we avoid its breakage and extraction through the clamping shaft. In addition to preventing access, the system allows the user to continue to open the door with his key even if the cylinder has been fractured by the mechanical fuse line (programmed breakage).

• Europrofile cylinder with standardised dimensions, from 30mm upwards.
• Long-neck reversible nickel-plated brass key (CP).
• Stainless steel pins, springs and rams.

The new Europrofile CPLUS High Security cylinder series has been specially developed to ensure greater protection against the main methods of vandalism. The CPLUS cylinder system incorporates a new protection element. This is a cut line made at each end of the cylinder body, as a mechanical fuse or programmed break. Its purpose is to fracture the cylinder in the event of a breakage attack. In this way, we prevent its breakage and extraction through the clamping shaft. In addition to preventing access, the system allows the user to continue opening the door with the key even if the cylinder has been broken along the line of the mechanical fuse (programmed breakage).

Description Lince CPLUS SERIES

• Europrofile cylinder with standardised size, from 30mm (VARIOUS SIZES AVAILABLE).
• Long neck reversible nickel plated brass key (CP).
• Mechanical fuse (program breakage)
• Anti-Bumping
• Anti-Picking
• Anti-Drilling, protection bars on rotor and body before and after the mechanical fuse.
• 5 pins
• Stainless steel pins, springs and rams.
• Personal card for key copying.

How do I know what size cylinder I need for my Danalock?

• Take out your existing conventional cylinder and note which side goes to the outside of the door.
• Measure the size from the locking shaft of the door outwards.
• The size in mm will be the side to select in the product option drop down when making your purchase.
• Follow this diagram. The size to select is the dimension called le.
• The inner side will always be 30mm. Supplementary parts are included to complete the inside measurement. The "spur" of the Danalock cylinder can also be easily cut. It is the outer dimension that is not modular and it is this dimension that we must take into account when selecting the cylinder we need for our door.

Maximum outside measurement: 50mm