No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
ZOOZ Outdoor Motion Sensor
ZSE70
New
Zooz 800 Series Z-Wave Long Range Outdoor Motion Sensor ZSE70 800LR | Motion, Temp, Lux
In Stock
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Technical characteristics
| Home Automation Technology | Z-Wave Long Range |
More info
Go Outside
Meet the latest version of our popular outdoor Z-Wave motion sensor. This is a an innovative detector packed with features. You can depend on it for both security and automation.
Mount it on a clean flat surface, add it to your Z-Wave hub, and program notifications for unexpected activity. Use these reports to automate lights, sirens, or even sprinklers to scare off an intruder.
The sensor also monitors brightness levels to help you fine tune your smart lighting schedules. You’ll be able to customize its behavior and performance as long as your hub grants you the access to advanced settings. Please take a look at the compatibility list below before purchasing.
Smarter Outdoor Lights
Automate outdoor lighting by pairing your motion sensor with any switch or dimmer from our portfolio. Ensure a clear pathway to the front door or garage after dark.
Add the sensor and the light switch of your choice to the hub using the convenient SmartStart method (just scan the QR code). Then create a smart rule for the lights to come on whenever motion is detected in front of the garage or at the back door. It’s that simple!
Depending on your hub’s capabilities, you will be able to create sophisticated scenarios to create the perfect motion-based rules for your daily routine.
Smarter Monitoring
The sensor gives you all the flexibility you need when it comes to functionality and installation. Use it exactly what you need it for with great results.
You’ll get motion, lux, and temperature reports to your hub how often you need them. Customize reporting behavior in advanced settings and use this valuable data to automate lights, HVAC equipment, and more.
While the sensor is rated for outdoor use, it can be just easily used inside of your home. It’s small enough to blend into any room and you can power it with included batteries or optional 12-24 V if you prefer a low-Voltage power supply
Extended Z-Wave info
DSK key or scan the QR code printed on the sticker on
the side of the cover to complete SmartStart inclusion.
the Z-Wave® button 3 times as quickly as possible. The
LED indicator will start blinking to confirm inclusion
mode and turn off once inclusion is completed.
gateway (hub).
2. Put the Z-Wave® hub into exclusion mode (not sure
how to do that? ask@getzooz.com).
3. Click the Z-Wave® button 3 times quickly.
4. Your hub will confirm exclusion and the sensor will
disappear from your controller''s device list.
save battery life. Use the Wake Up Command Class to adjust
the interval (in seconds, working in 3600s intervals, with 3600
as min and 86400 as max values). Click the Z-Wave® button
once to wake the sensor up manually. During wake-up, the
sensor turns the Z-Wave® radio for 10 seconds to receive
communication from the hub. Long wake-up interval will not
affect how o
otherwise inoperable, you may need to reset the device
to factory settings manually. In order to complete the
process, make sure the sensor is powered, then hold
the Z-Wave® button down for at least 10 seconds.
The LED indicator will start flashing blue and turn solid
blue for a couple of seconds to indicate successful reset.
NOTE: All previously recorded activity and custom settings will be
erased from the device’s memory.
