NETIS P110GC Switch PoE 802.3af / at 10 Gigabit ports (8 PoE) desktop. Up to 120 watts

The Netis P110GCF Gigabit PoE Switch or Switch offers a great selection to expand your home, store or office network. It fully complies with the IEEE802.3 / 802.3u / 802.3ab / 802.3z Ethernet standards. Provides 8 10/100 / 1000Mbps PoE RJ45 ports and 2 Gigabit uplink RJ45 ports . All PoE RJ45 ports support Power over Ethernet function and can automatically detect and supply power with IEEE 802.3at / af (15 / 30W) compliant devices such as PoE access points, IP phones, IP cameras, etc. It is a perfect way to expand your network structure.

- 10 * 10/100 / 1000Mbps RJ45 ports with auto-negotiation, 8 with POE function
- Supports POE power up to 30W for each PoE port, 100W for all PoE ports
- Supports POE IEEE 802. 3at / af compliant Powered Device (PD)
- IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
- 20 Gbps backplane bandwidth / switching fabric capacity
- Supports a 2K MAC address table, MAC address automatic learning and automatic aging
- Green Ethernet technology for effective energy savings
- LED indicators for easy diagnosis and management
- Plug and play, no configuration required
- Steel housing, with external power supply

Hardware
Interface
8 × 10/100 / 1000Mbps POE Data / Power ports

2 × 10/100 / 1000Mbpsuplink RJ45 ports (Data)

Basic function
Follows the IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet protocol

Supports POE IEEE 802.3af / at compliant Powered Devices (PDs)
Store-and-forward switching scheme
Supports IEEE802.3X full duplex and Backpressure half duplex
MAC address self-learning and self-aging
Standards
IEEE 802.3 10BASE-T Ethernet

IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit Ethernet

IEEE 802.3af / at, Power over Ethernet

IEEE 802.3x Flow Control

Mode
Normal switching mode
Data transfer rate
Etherent: 10Mbps (Half-duplex); 20Mbps (Full-duplex)

Fast Entherent: 100Mbps (Half-duplex); 200Mbps (Full-duplex)

Gigabit Ethernet: 2000 Mbps (full duplex)

Store and forward
Yes
Switching capacity
20G
MAC address
Table size
4K
Jumbo frame
2048 bytes
Environment
Operating temperature 0 ^ 40
Storage temperature -40 ^ 70
Operating humidity 10% ^ 90% RH non-condensing
Storage humidity 5% ^ 90% RH non-condensing
POE power input
Standards
Single port maximum power 30W,
Maximum power of the entire switch 100W

Supports overcurrent, overvoltage and short circuit protection

Supports high power PD soft start

Supports sequential boot
Power Pin: 12 + / 36-
AC 110 ~ 240V 50 / 60HZ
Type of wiring
1000Base-TX: Cat 5e or better UTP / STP (d100m)

100Base-TX: Cat 5e or better UTP / STP (d100m)

10Base-TX: Cat 5e or better UTP / STP (d250m)
Dimensions
(L x W x H)
190mm * 140mm * 43mm