Stonet P116GC - 802.3af/at PoE Switch 16 Gigabit ports+2 Gigabit UP-Link ports. Up to 200W

Stonet P116GC is a standard 18-port POE switch that provides 16 GE POE ports, 2
Gigabit Uplink ports. Ports 1~16 have POE power capability and can be used
such as Power over Ethernet devices. The power port can automatically detect and recognize
automatically recognize the powered device that complies with the IEEE 802.3af/at standard and supply
power through the network cable. 2 Gigabit uplink ports ensure smooth transmission for
NVRs or uplink routers. The P116GC is designed for HD CCTV networks or network systems
Of high speed.

Switch Stonet P116GC PoE 16 Giga (Power Over Ethernet)
16 Gigabit PoE 802.3 af/at ports (15/30W) and up to 200 W+ 2 Giga Up-Link
Desktop Format
Internal power supply 110-240 V 50/60 Hz
MAC Address Table 2 Kb., Switching 36 Gbps; Jumbo Frame 2 Mb.
Supports 802.3x Full Duplex and Flow Control
Protection against discharges, lightning and ESD
Includes DIP normal mode/Watch Dog/VLAN

FEATURES
- Compatible with 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T
- Supports IEEE 802.3af/at compliant POE Powered Devices (PDs)
- Modes: Normal switch mode / Watchdog model (automatically manages CCTV cameras
power)/VLAN model
- Ports 1~16 have gigabit POE power capability and can be used as Power over Ethernet devices.
over 2*10/100/1000Base-T Uplink Ethernet devices
- Supports full duplex based on IEEE802.3x and half duplex based on Backpressure
- Automatic MDI/MDIX crossover for all ports
- Supports non-blocking wire speed forwarding
- Auto-learning and auto-aging of MAC addresses
- Steel casing, the total POE power budget of 200W
-Plug and Play

SPECIFICATION
Hardware
Interface 16*10/100M/1000M POE ports (Data /Power)
2*10/100/1000M Uplink RJ45 ports (Data)
Basic function
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging
standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
Mode Normal switch mode/VLAN&watch dog model
Data Transfer Rate
Ethernet : 10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast Ethernet :100Mbps(Half-duplex);200Mbps(Full-duplex)
Gigabit Ethernet: 2000Mbps(Full-duplex)
Store & Forwarding Yes
Switching Capacity 36G
MAC Address
Table Size 2K
Jumbo Frame 2048 byte
environment
Operation Temperature 0 ^40
Storage Temperature -40 ^70
Operation Humidity 10%^90% RH Non-condensing
Storage Humidity 5%^90% RH Non-condensing
Power Input POE
standards
Single port maximum power 30W,
Whole switch maximum power 200W
Supporting over-current, over-voltage and short-circuit protection
Supporting Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
Cabling type
1000BASE-T : Cat5e or better UTP(d100m)
100Base-TX: Cat 5e or better UTP/STP(d100m)
10Base-TX: Cat 5e or better UTP/STP(d250m)
Dimensions 280mm*180mm*43mm(L x W x H )