Name: ZRC-90EU
Manufacturer:Remotec
Identifier:BW8510EU
Z-Wave Certification Number:ZC10-15120001
Hardware Plattform:ZM5202
FLiRS:NO
Role Type:Portable Controller
Short Description:The ZRC-90 Scene Master is a Z-Wave Central Scene Controller. When one of the buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal which it can use to trigger unlimited control possibilities. With 8 buttons, each supporting a long-press capability, you can control 16 different actions in your central controller.
Description:The ZRC-90 Scene Master is a Z-Wave Central Scene Controller. When one of the buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal which it can use to trigger unlimited control possibilities. With 8 buttons, each supporting a long-press capability, you can control 16 different actions in your central controller. The ZRC-90 is a great solution for triggering events more quickly than taking out your smart-phone and running a home control app. The Scene Master is ideal for kids, elderlies and guests who may not have full access to your smart home’s mobile application and hence may not have the rights to switch on various lighting, heating, air conditioning and other home appliance. With a convenient snap-in wall mount, the ZRC-90 can also be removed to keep it handy while you go about your home for the ultimate in simple convenience.
Group
Max Nodes
Description
1
1
Z-Wave Plus Lifeline:
Association Group-1 will be a default status report channel in ZWave+ lifeline requirement. Only one node can be assigned to
this association group.
Number
Size (Bytes)
Default Value
Name
Description
Central Scene
COMMAND_CLASS_CENTRAL_SCENE
Wake Up
COMMAND_CLASS_WAKE_UP
Learn Mode (adding another controller)
When prompted by your primary controller (gateway), click once on the “L” button.
Factory Reset
Press and keep holding “R” button not less than 10 seconds.
Release “R” button then triple click on “R” button within 2 seconds.
Device Wake-Up
Enter to the Listening mode (Wake up) by click once on “W” button.
Additional Special Features
Create a Primary Controller - Press “W+L” buttons simultaneously until LED light up.
Create a Secondary Controller - Press “W+R” buttons simultaneously until LED light up.
(Place the two controllers close to each other.)
Inclusion
Press “L+R” buttons simultaneously until LED light up to add the device into ZRC-90 Z-Wave network.
Exclusion
Click once on the “R” button to remove the device from ZRC-90 Z-Wave network.