ZIPATO - Z-WAVE+ Carbon Monoxide Detector

The Zipato carbon monoxide sensor is designed to give early warning if an abnormally high level of carbon monoxide is detected. In the case of a detection, an audible alarm is activated in addition to a Z-Wave signal sent to the main controller.

Therefore, it is possible to create different scenarios activated by this alert.

This detector is a Z-Wave Plus product and, therefore, it is compatible with all the features offered by the 500 series chipset.

You need a Z-Wave controller (dongle, home automation box, ...) to integrate this detector into your network if you already have an existing network.

FUNCTIONS:

Z-Wave 500 Series
Sound alert and Z-Wave to detect a high level of carbon monoxide
Low energy consumption
Automatic low battery report
Easy installation

TECHNICAL CHARACTERISTICS :

Protocol: Z-wave Plus (868.42MHz)
Power supply: CR123A battery, 1400mAh
Alarm: 85dB
Operating voltage: 3V
Operating current: 90mA
Operating temperature: -10 ° C to + 50 ° C
Radio range: 30 m
Dimensions: 54 x 54 x 45 mm
Weight: 132g
Standards: EMC 2004/108 / CE, R & TTE 1995/5 / EC, LVD 2006/95 / EC, FCC Part 15