Viewed products

HEIMAN - Z-WAVE+...

The Heiman Carbon Monoxide Sensor is...

ZIPATO - Detector de Monóxido de Carbono Z-WAVE+

View larger

HEIMAN - Z-WAVE+ Carbon Monoxide Detector

Reference ZIP-HS1CA-Z

Condition: New

The Heiman Carbon Monoxide Sensor is designed to give an early warning if an abnormally high level of carbon monoxide is detected.

More details

In Stock

Remove this product from my favorite's list.
Add this product to my list of favorites.
Print

Technical characteristics

Home Automation Technology	Z-Wave Plus

More info

The Heiman Carbon Monoxide Sensor is designed to give an early warning if an abnormally high level of carbon monoxide is detected. In the event of a detection, an audible alarm is activated in addition to a Z-Wave signal sent to the main controller.

Therefore, it is possible to create different scenarios triggered by this alert.

This detector is a Z-Wave Plus product and therefore supports all the features offered by the 500 series chipset.

A Z-Wave controller (dongle, home automation box,...) is needed to integrate this detector into your network if you already have an existing network.

FUNCTIONS:

Z-Wave 500 Series
Sound and Z-Wave alert to detect high level of carbon monoxide
Low energy consumption
Automatic low battery report
Easy installation

TECHNICAL CHARACTERISTICS :

Protocol: Z-wave Plus (868.42MHz)
Power supply: CR123A battery, 1400mAh
Acoustic alarm: 85dB
Operating voltage: 3V
Operating current: 90mA
Operating temperature: -10°C to +50°C
Radio range: 30m
Dimensions: 54 x 54 x 45mm
Weight: 132g
Standards: EMC 2004/108/EC, R&TTE 1995/5/EC, LVD 2006/95/EC, FCC Part 15

Extended Z-Wave info

Name: Zipato Carbon Monoxide Sensor

Manufacturer:Zipato

Identifier:hm-hs1ca-z.eu

Z-Wave Certification Number:ZC10-17115860

Hardware Plattform:ZM5202

FLiRS:NO

Role Type:Reporting Sleeping Slave

Short Description:Zipato Carbon Monoxide Sensor (Z-Wave) is designed to give early warning of higher carbon monoxide level, based on Z-Wave technology.

Description:Zipato Carbon Monoxide Sensor (Z-Wave) is designed to give early warning of higher carbon monoxide level, based on Z-Wave technology. Z-Wave is a wireless communication protocol designed for remote control of appliances in residential automated homes and light commercial environments.

Manual download HERE.

Group

Max Nodes

Description

Association group 1: Lifeline association group Include command classes: Battery report, Notification report, and Device Reset Locally notification, Binary report.

Association group 2: Root Device group(Binary Sensor) Binary Sensor Command Class: Compatible with 300 series 1-Binary Sensor reports status of CO or no CO via Lifeline. 2-When the sensor detects status change of CO and no CO, the device will be triggered.

Association group 3: Root Device group(Notification) 1-Notification reports status of detect CO or no CO via Lifeline. 2-When the sensor detects status change of CO and no CO, the device will be triggered.

Number

Size (Bytes)

Default Value

Name

Description

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Battery

COMMAND_CLASS_BATTERY

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Notification V4

COMMAND_CLASS_NOTIFICATION_V4

Powerlevel

COMMAND_CLASS_POWERLEVEL

Sensor Binary V2

COMMAND_CLASS_SENSOR_BINARY_V2

Version V2

COMMAND_CLASS_VERSION_V2

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Inclusion

Press button on sensor 3 times within 1.5s, Green LED will blink 3 times within 1 second.

If Inclusion Process is successful, Green led will turn off.

Exclusion

Press button on sensor 3 times within 1.5s, Green LED will blink 3 times within 1 second.

If Inclusion Process is successful, Green led will turn off.

Factory Reset

Remove battery.

Insert battery while holding button on sensor.

Please use this procedure only when the network primary

controller is missing or otherwise inoperable.

Device Wake-Up

Wake up Notification is transmitted every 24 hours by default.

Wake up Notification is transmitted after Notification Report is Transmitted

Color

If the product is only available in one color, pick the color from the list.

Supported Notification Types

Select the Notification Types that the product handles (controllers), or sends (slaves).

Battery Quantity

Enter the number of batteries of the designated type that the product uses.

Battery Type

Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.