INTESIS - Daikin WiFi A / C household units (ASCII)

WiFi Interfaces for Air Conditioners

Intesis WiFi interfaces have been specifically designed for the integration of air conditioning in home automation or home automation systems. Communication is based on a simple ASCII protocol that can be easily implemented as a driver in home automation controllers or smarthome gateways. With the drivers already available in many home automation platforms on the market, such as eedomus, Fibaro, Vera, Home Assistant, etc. available on the market, Air Conditioning units can be easily integrated and controlled by this type of home automation systems.

General characteristics for the WiFi configuration that supports both dynamic and static IPs. Drivers available for the main home automation / smarthome manufacturers. Generation of new integration drivers with an easy and open protocol. Auto-discovery of WiFi devices installed on the network. Two types of solutions: Brand specific solutions with direct connections that support unit error code data, and a universal solution based on infrared (IR) communication.

The DK-AC-WMP-1 interface enables complete and natural integration of Daikin air conditioners into IP-based control systems. Compatible with the domestic line (RAC) models marketed by Daikin.

Follow these safety and installation instructions carefully. Improper work can result in serious harm to your health and can also seriously damage the interface and / or the AC indoor unit.

FEATURES :

Monitor the temperature of an air-conditioned area
Controlling the temperature of an air-conditioned area
Create automatic air conditioning management Compatible with eedomus and Vera home controllers (soon with Jeedom)

TECHNICAL SPECIFICATIONS :

Case: ABS (UL 94 V-0). 2.1mm thick
Dimensions: 127 x 50 x 17 mm
Weight: 80g
White color
Power supply: 12V, 60mA typical. Does not require an external power supply (supplied by AC unit)
Radio parameters
RF frequency range: 2412 to 2484 MHz
Output power (average):
20 dBm (11Mb / Sec.)
14 dBm (72.2Mb / Sec.)
Mounting: Wall
LED Indicators: 1 x Device Status
Operating temperature: 0ºC to 40ºC
Operating humidity: <93% RH, non-condensing
Air humidity: <93% RH, non-condensing
RoHS Compliance: Compliance with the RoHS Directive (2011/65 / EU).