No products
Prices are tax included
Product Under Order
INWMPTOS001R000
New
Monitor and control your Toshiba air conditioning system remotely through your home automation system.
In Stock
Description
DIRECT CONNECTION TO INDOOR UNITS
The portal is directly connected to an indoor unit. This allows not only the control of the main AC functions such as the operating mode, the fan speed, the temperature set point ... but also the monitoring of errors and alarms.
THE SOLUTION
Intesis WiFi gateways have been specifically designed to be the best AC integration solution for home automation systems. Communications are based on a simple ASCII protocol that can be easily implemented, in driver form, in home controllers or Smart Hubs. With the controllers already available in many home automation platforms on the market, air conditioning units can be easily integrated and controlled.
Drivers for WMP AC Interfaces
Intesis - AMX driver | Download | |
Intesis - Control 4 driver | Download | |
Intesis - Crestron driver | Download | |
Intesis Eedomus driver | Download | |
Intesis - ELAN driver | Download | |
Intesis - FIBARO driver | Download | |
Intesis - Iridium driver | Download | |
Intesis - Jeedom driver | Download | |
Intesis - RTI driver | Download | |
Intesis - Savant driver | Download | |
Intesis - VERA driver | Download |
Follow the safety and installation instructions carefully. Improper work can seriously harm your health and can also seriously damage the interface and / or the AC indoor unit.
FUNCTIONS:
Monitor the temperature of an air-conditioned area
Control the temperature of an air-conditioned area
Create automatic air conditioning management systems
Compatible with eedomus, Vera and Jeedom home automation controllers
TECHNICAL DATA :
Housing: ABS (UL 94 HB). 2.5mm thick.
Dimensions: 108 x 70 x 28 mm
Weight: 80g
White color
Power Source: 14V, 110mA typical (no external power source required, provided by AC unit)
Radio settings:
RF frequency range: 2412 to 2497 MHz
Output power (average):
8 dBm (11 Mb / s)
Mounting: on the wall
LED indicators: 1 x Device Status
Operating temperature: 0ºC to 40ºC
Operating humidity: <93% RH, non-condensing
Storage humidity: <93% RH, non-condensing
RoHS Directive Compliance: Complies with the RoHS Directive (2011/65 / EU).
Translation done with the free version of the translator www.DeepL.com/Translator
HVAC compatibility
Make sure this gateway is compatible with the A / C model by visiting http://compatibility.intesis.com/
Compatible A / C Models
RAV-SM - KRT-E | RAV-SM - KRTP-E | RAV-RM - KRTP-E | RAV-SM - BT-E | RAV-SM - BTP-E | RAV-RM - BTP-E | RAV-SM - DT-E | RAV-SM - DTP-E | RAV-SM - SDT-E | RAV-RM - SDT-E | RAV-SM - CT-E | RAV-SM - CTP-E | RAV-RM - CTP-E | RAV-SM - MUT-E | RAV-RM - MUT-E | RAV-SM - UT-E | RAV-SM - UTP-E | RAV-RM - UTP-E | RAV-DXC010 LC | MMU-AP - MH-E | MMU-AP - MH1-E | MMU-AP - H | MMU-AP - HP-E | MMU-AP - HP1-E | MMU-AP - YH-E | MMU-AP - YH1-E | MMU-AP - SH-E | MMU-AP - SH1-E | MMU-AP - WH | MMU-AP - WH1 | MMD-AP - BH-E | MMD-AP - BHP-E | MMD-AP - BHP1-E | MMD-AP - HE | MMD-AP - HP-E | MMD-AP - HP1-E | MMD-AP - HFE | MMD-AP - SPH-E | MMD-AP - SPH1-E | MMC-AP - HE | MMC-AP - HP-E | MMC-AP - HP1-E | MML-AP - BH-E | MML-AP - BH1-E | MML-AP - HE | MML-AP - H1-E | MMF-AP - HE | MMF-AP - H1-E | MML-AP - NH-E | MMK-AP - H | MMK-AP - H1 | MMK-AP - MH-C | MMK-AP - MH-E | MMK-AP - MH1-E | MMK-AP - MHP1-E | RAV-SE - 1CP-ID | RAV-SE - 1CP-T | RAV-SE - 1UP-ID | RAV-SE - 1UP-T | RAV-SP - UT-UL