No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Aeotec Range Extender 7 (Double Pack) - Z-Wave signal extender repeater
AEOEZW189-PCS2
New
The Aeotec Range Extender 7 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Set of 2 repeaters (pack).
In Stock
- Remove this product from my favorite's list.
- Add this product to my list of favorites.
Technical characteristics
| Technology | Z-Wave 700 Series |
More info
Product information "Aeotec Range Extender 7 (Double Pack)"
*** Please note that this is a 2pcs pack version. Order quantity 1 pack = 2pcs. ***
Wireless technology is not always perfect, which is why Aeotec manufactures the Range Extender 7, a simple "plug and play" device that can be used to perfect your home automation system. It receives the Z-Wave and Z-Wave Plus signals, repeats them and relays them to your Z-Wave automation network, increasing its range and reliability. The Aeotec Range Extender 7 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals.
Just plug it into a power outlet. Connect it to your Z-Wave network, and it automatically starts to improve any poor Z-Wave signals that are in range.
Built on Aeotec Gen7 hardware and firmware stack. It has a wireless range that is up to 250% greater than Range Extender 6 and non-Gen7 technology.
Aeotec's Range Extender 7 is based on the most advanced wireless automation technology available. It combines Aeotec's unique Gen7 technology with Z-Wave Plus V2 and the 700 series. This allows for a huge range of enhancements, including S2 security and SmartStart installation.
The Aeotec Range Extender 7 is compatible with a large number of certified Z-Wave gateways.
Characteristics:
Built with the Z-Wave 700 series - longer range, more efficient and better performance compared to the previous generation series
Z-Wave Repeater - A simple plug and play device
Wireless technology: Z-Wave Plus V2
SmartStart enabled
S2 security
Type E / F plug
Power supply: 230V 50Hz, Max: 150mA
Power Consumption: 1.2W
Extended Z-Wave info
Manual download HERE.
Make sure the product is powered. To complete the reset process manually, press and hold the Action Button for at least 20s, and Factory Reset is performed when released. The LED will become slow fade-in fade-out white color, which indicates the reset operation is successful. Otherwise, please try again. Contact us for further support if needed.
Note:
1. This procedure should only be used when the primary controller is missing or inoperable.
2. Factory Reset will:
(a) Remove the product from Z-Wave network;
(b) Delete the Association setting;
2. Make sure the product is powered. If not, plug it into a wall socket and power on; its LED will be slow fade-in fade-out white color all the time.
3. Single-click Action Button; LED starts fast blinking white color for 30s, which indicates entering inclusion mode.
4. If your Z-Wave Controller supports S2 encryption, enter the first 5 digits of DSK into your Controller's interface if /when requested. The DSK can be found on the packaging.
5. If inclusion is successful, LED will become a solid white color for 2 seconds and stay on by default. Now, this product is a part of your Z-Wave home control system. You can configure it and its automations via your Z-Wave system; please refer to your software's user guide for precise instructions.
6. Should its LED go back to slow fade-in fade-out white color, it indicates inclusion is unsuccessful. Contact us for further support if needed.
2. Make sure the product is powered. If not, plug it into a wall socket and power on.
3. Single-click Action Button; LED will become a flashing white color for 2 seconds, which indicates entering exclusion mode.
4. If the exclusion is successful, LED will change to the default unpaired state which is slow fade-in fade-out white color.
5. Should its LED stay ON or OFF (depending if LED is enabled or disabled), it indicates the exclusion is unsuccessful. Contact us for further support if needed.
