SUNRICHER - 4-Button 2-Zone Z-Wave Scene Controller

The SR-ZV9001K4-DIM-G2 is a wall-mounted Z-Wave push-button scene controller that adopts the latest Z-Wave Plus networking technology to switch and dim LED lighting. This is a secondary controller that can be integrated into any Z-Wave network through a main controller or a home automation box.

The Sunricher scene controller is powered by a lithium battery. It communicates wirelessly and is compatible with all Z-Wave lighting receivers. The signal transmission distance is up to 30 m.

Supports 3 association groups, one association group for lifeline to main controller (master) and 2 association groups for peripherals. The latter can include a maximum of 5 Z-Wave devices per group. The Sunricher scene controller is compatible with existing frameworks from Berker, Gira, Jung and Merten. It is also easy to install on the wall using adhesive or screws.

FUNCTIONS:

Z-Wave Scene Controller
Control 2 association groups (maximum 5 devices per group)
Two buttons to manage ON/OFF commands and dimming
Capable of acting as a secondary controller (impossible to use as a primary controller without a home automation box)
Z-Wave Plus Compatible
Compatible with Berker, Gira, Jung and Merten frames

TECHNICAL SPECIFICATIONS :

Module Type: Z-Wave Controller
Power: 3VDC (1xCR2450 battery)
Z-Wave Frequency: 868.42MHz
Range: up to 100 m outdoors, 20 m indoors
Dimensions: 71.2 x 71.2 x 13.6mm
IP protection: IP20
Installation: Adhesives or screws
Operating temperature: 0 to 40°C