FIBARO Walli Controller - recessed remote control Z-Wave + 700

Controller Fibaro Walli

The FIBARO Walli Controller is an intelligent wall controller that is powered by battery or direct current. It can be used on Walli's double and triple cover plates, and as an additional button for other devices.

Goodbye! - smart start

You can place your Walli controller near entry doors so you can say goodbye to your home with just one click.

The farewell scene can:

turn off all the lights,
lower the temperature of your house,
adjust the blinds and curtains to the desired position,
set your alarm,
lock the doors,
close the garage doors.
Just how you like it. - precise light control
There are other controllers that can trigger an action, but no other control is so smart. The Walli Controller can act like your normal Z-Wave dimmer to adjust the lights to whatever level you want.

Walli controller:

It is a smart Z-Wave remote control,
supports associations,
understand other devices,
can communicate directly with other Z-Wave devices.
Control them all! - smart life
Opening, closing, adjusting and changing the position of all the blinds or shutters in the house can be tedious. With the Walli Controller, you can control them all at the same time. Not only at the same time, but also in the exact position, because it is not just a button, but a smart switch.

Walli controller:

Versatile smart controller,
flexible and suitable for many environments.
Have a good night! - put your house to sleep
If you don't have a switch on your nightstand, don't worry! Walli Controller is a battery operated wall switch that can be easily applied almost anywhere. Now you can put together the good night scene you've always dreamed of.

A good night scene can:

arm areas that should not be visited at night,
send an open window report to your smartphone,
adjust the room temperature,
close the front doors.
Too late for electrical changes? - battery to the rescue
Have you finished your house yet? Is it too expensive to add an electrical installation here now? The Walli Controller has been prepared for situations like this. Whenever you feel the need for an additional switch, simply install the Walli controller. It comes with double-sided tape, so you have everything you need right out of the box.

The Walli Controller can be used as an on / off switch:

can be added without the need for prior electrical installation,
It can be configured in the FIBARO system to act as a toggle switch in a toggle installation, which means you can turn a single light source on and off with another Z-Wave switch.
Upgrade your Walli! - more buttons without mess
The smart home offers you endless possibilities, but for this you will undoubtedly need a few buttons. You can't be prepared for all scenarios, but with the Walli Controller you don't have to. You can add an additional Walli controller to an existing Walli switch simply by changing the cover plate.

Walli controller:

is compatible with Walli hedge frames,
does not require a flush box,
can extend one or two single or double recessed boxes

FUNCTIONS:

Universal switch to start scenes
Preset settings allow easy adjustment of operation for specific types of controlled devices
It works with batteries or with direct current
Can be assigned to any function, for example light switch or blind
Compatible with the Walli product range, but also perfect as a standalone button
Power connector with cable and double-sided stickers included in the box
Equipped with a built-in temperature sensor
Supports Z-Wave network security modes: S0 with AES-128 encryption and S2 authenticated with PRNG-based encryption
Works as a repeater of the Z-Wave signal when powered by VDC (all non-battery powered network devices will act as repeaters to increase network reliability)
Z-Wave 700 technology
Its luminous ring glows with 8 colors
Capacity for 8 different button combinations

TECHNICAL SPECIFICATIONS:

Power: battery and / or power supply
Battery type: ER14250 ½AA 3.6V (included)
Power supply type: 5-24 V DC SELV, LPS or NEC class 2 (not included)
Battery life: approximately 2 years (with default settings and a maximum of 10 beats per day)
Operating temperature: 0-40 ° C
Ambient humidity: 0 to 90% RH non-condensing
Radio protocol: Z-Wave (700 series chip)
Radio frequency band: 868.0-868.6 MHz
Maximum transmission power: + 13dBm
Range: up to 50m outdoors, up to 40m indoors (depending on terrain and building structure)
Dimensions (height x width x depth): 86 x 86 x 20 mm
Compliance with EU directives: RoHS 2011/65 / EU, RoHS 2015/863, RED 2014/53 / EU

All documentation and instructions for Fibaro products are available at manuals.fibaro.com