MCO-Home Glass Touch GEN5 (2 buttons) Z-Wave white crystal touch on-off switch

The MCO-Home Z-Wave Plus TPS412 GEN 5 technology touch switch is a double wall switch with integrated switch relays and scene control. The relays can be controlled with both the touch switch, which is integrated into the glass surface, and with the Z-Wave commands. The relay can switch two loads of up to 1,100 watts. In addition to local switching, the device can be used to control two groups of directly associated devices. A blue LED on each button indicates the switching status.

The double wall touch switch can be easily connected to two electrical loads without installing a flush mounted module separately. The double relay is inside a module that connects directly to the glass touch button. With that double and tactile MCO Home wall switch you can replace any insert switch or toggle switch. The wall switch can be mounted in any recessed box.

With the elegant MCO Home glass Z-Wave touch switches you can easily integrate your already installed lights into your home automation network. Without installing new cables, you can change the lighting as usual through the wall switch, but thanks to Z-Wave technology also through the remote control, the smartphone or the sensor-controlled automation. With the new scene control function you can now start your configured scenes with one touch.

Characteristics:

Wall switch with integrated double relay and scene control
Elegant glass touch switch (two buttons)
Ready for assembly, incl. glass frame
Replace the complete wall switch
2 Relays up to 1,100W / 230VAC each
Integrated status LED
Allows Z-Wave Associations
For 3-wire systems, neutral required
Wireless Technology: Z-Wave Plus

Description:

This MPS-Home model TPS412 recessed switch with glass touch surface and design give a modern style to your switches for the control of your lamps or electrical appliances.

This double Z-Wave touch switch can control any type of load, a light or an electrical device with a load of up to 1100W per circuit or channel. It is possible to combine up to 5 other associated devices directly from the switch or the Z-Wave controller.

In addition to switching local loads, two groups of associated devices can be controlled with the device.

The double touch switch is also equipped with an LED that indicates its status.

Functions:

• Send signal to 2 lamps or a remote device
• It is installed instead of an existing switch
• 2 load on / off
• Compatible with the controls of the Association (Group 1 and Group 2)
• Local support control
• Status LED
• Modern Crystal Design
• Touch button

Characteristics:

• Module Type: Z-Wave Receiver
• White color
• Power: 230 V, 50 Hz
• Wiring: 3 child, Neutral needed
• Maximum power: 5A (1100W) per channel / circuit
• Frequency: 868.42 MHz
• Range: up to 30 meters
• Dimensions: 86 x 86 x 43 mm
• Display: blue LED

It is important to note that this double touch switch requires a Neutral cable to operate. A 50 mm deep and 67 mm deep wall mechanism box is recommended for installation (SCHALB71322).