AEOTEC Bombilla LED 6 Multi-Color (E27)

Características técnicas

Tecnología	Z-Wave Plus

Descripción

El smart AEOTEC LED Bulb 6 Multi-Color convierte la luz de su hogar en luces inteligentes. La bombilla LED se adapta a todos los portalámparas E27 y se puede conectar a la puerta de entrada de Smart Home a través de la tecnología inalámbrica Z-Wave justo después de ser alimentada con 230V. El chip Z-Wave requerido ya está integrado en la carcasa de la bombilla. Puede variar el brillo y el color de la luz fácilmente a través del control remoto, teléfono inteligente o tableta. Luz de día, luz de velas o ambiente de fiesta: a partir de ahora puede definir un ambiente de luz de acuerdo con sus deseos. También puede usar escenas (por ejemplo, en el caso de una alarma) para activar un color de luz apropiado como el rojo.

La edición multicolor de la bombilla LED 6 ofrece 16 millones de colores regulables. Dependiendo de su estado de ánimo, puede utilizar la gama completa de colores del arco iris y muchos más.

Debido a la tecnología LED, el consumo de energía es muy bajo en comparación con las bombillas convencionales. La bombilla Aeotec es tan brillante como una bombilla convencional de 60 vatios, pero solo necesita 9,5 vatios. Puede ahorrar dinero y proteger el medio ambiente porque la bombilla LED tiene una vida útil de hasta 25,000 horas.

caracteristicas:

Bombilla LED RGBW regulable ofrece 16 millones de colores
Aspecto ligero: 2700K a 6500K
Brillo: 806 lúmenes
CRI: 80
Entrada: 220-240V, 50Hz
Lámpara para casquillo E27
Consumo de energía: máx. 9.5 W
Ángulo de radiación: 240 °
Tecnología inalámbrica: Z-Wave Plus

Información Ampliada Z-Wave (Inglés)

Nombre: LED Bulb 6:Multi-Colour

Fabricante:Aeotec

Identificador:ZWA002-C

Número de Certificación Z-Wave:ZC10-18046097

Plataforma Hardware:ZM5101

FLiRS:NO

Tipo de Role:Always On Slave

Descripción Corta:RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors

Descripción:✓ Standard form factor and appearance of the light bulb with 800 lm output ✓ RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors ✓ Possible to be included in groups, scenes, or schedules ✓ Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

1

Set Configuration parameter 0x50 0: nothing. 1: Send the Basic Report. 2. Send Device Reset Locally CC

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

1

0

User custom mode for LED animations.

User custom mode for LED animations. 0 = Disable custom mode. 1= Blink Colors in order mode. 2=Randomized blink color mode

16

1

20

Ramp rate when dimming using Multilevel Switch V1 CC in 100ms

Ramp rate when dimming using Multilevel Switch V1 CC in 100ms Value range = 0x00 -0x64

2

1

0

Enable/Disable Strobe over Custom Color.

Enable/Disable Strobe over Custom Color. 0 = Disable. 1 = Enable. Others = Ignore.

3

1

50

Set the rate of change to next color in Custom Mode.

Set the rate of change to next color in Custom Mode. Value1 ~ Value4: Value Range = 5 - 8640000 (50 - 86400000ms)

4

1

Set color that LED Bulb blinks in (Blink Mode)

Set color that LED Bulb blinks in (Blink Mode) -128 to 127 corresponds with the unsigned values 0 to 255 or hex values 0x00 to 0xFF

80

1

Enable to send notifications to associated devices (Group 1) when the state of LED Bulb is changed.

Enable to send notifications to associated devices (Group 1) when the state of LED Bulb is changed. 0 = Nothing. 1= Basic CC report.

81

2

2700

The user can configure the parameter to adjust the color component Warm White.

The user can configure the parameter to adjust the color component Warm White. Value range =Warm White(0x0A8C(2700k) ~ 0x1387 (4999k))

82

2

6500

The user can configure the parameter to adjust the color component Cold White.

The user can configure the parameter to adjust the color component Cold White. Value rang = Cold White (0x1388 (5000k) ~ 0x1964 (6500k))

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic

COMMAND_CLASS_BASIC

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V2

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Switch All

COMMAND_CLASS_SWITCH_ALL

Switch Color

COMMAND_CLASS_SWITCH_COLOR

Switch Multilevel V2

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

Version V2

COMMAND_CLASS_VERSION_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Exclusion

Remove for exclusion

1. Assuming led bulb was added to controller.

2. Triggered by OFF -> ON -> OFF -> ON -> OFF -> ON (between 0.5-2 seconds each time).

3. LED Solid Purple/Violet Color (0xEE82EE) during the unpairing process. (Timeout is 10 seconds).

 Failure:

Blinks between 100% White and Red 0x0000FF color for 3 seconds (at a rate of 200ms per flash), Once 3 seconds have passed, the LED should return to the last color ( memory status(color cc set)) of LED Bulb.

 Success:

Blinks between 100% White and Blue 0x0000FF color for 3 seconds (at a rate of 200ms per flash). Once 3 seconds have passed, the LED should return to a Warm White LED at 100%.

Factory Reset

Reset the Device.

1. Assuming led bulb was added to controller and was power on.

2. RGBW bulb re-power 6 times (between 0.5-2 seconds each time).

Note: ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON

3. If the 6th power on, the led bulb change to Yellow color(into pairing process ), which means that the reset factory settings are successf.

Using this action in case of the primary controller is missing or inoperable.

Inclusion

Add for inclusion

1. Ensure the led bulb has been excluded outside the network.

2. Triggered by OFF ->ON (between 0.5-2 seconds each time)

3. LED solid yellow Color (0xFFFF00) during the pairing(Timeout is 10 seconds).

 Failure:

Blinks between 100% White and Red 0x0000FF color for 3 seconds (at a rate of 200ms per flash), Once 3 seconds have passed, the LED should return to a Warm White LED at 100%

 Success:

Blinks between 100% White and Green 0x00FF00 color for 3 seconds (at a rate of 200ms per flash). Once 3 seconds have passed, the LED should return to a Warm White LED at 100%.

Color

If the product is only available in one color, pick the color from the list.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Switch Load Capacity Watts

The amount of switch load energy the product is rated for in Watts