Everspring foco led zwave exterior de 20W con detector de movimiento

Características técnicas

Tecnología	Z-Wave Plus

Descripción

Pequeño pero potente, este foco LED con detector PIR es un proyector de seguridad compacto y totalmente automático. Su diseño estético lo hace apto para su instalación en las zonas delanteras de la casa que suelen estar ocupadas por focos y lamparas convencionales.

Cuando se conecta al controlador Z-Wave, el usuario puede de forma remota y recibir una notificación cuando el detector PIR detecta movimiento mediante Z-Wave. A su vez, de forma autónoma, el foco LED se encenderá automaticamente durante un tiempo ajustable localmente en el foco.

Este producto es compatible con el protocolo de seguridad S2, que utiliza mensajes cifrados de Z-Wave Plus para comunicarse con otros productos seguros de Z-Wave Plus. Un controlador seguro Z-Wave Plus debe ser usado para utilizar completamente las características de seguridad de este producto.

Digamos que puede ser considerado un sensor + actuador Z-Wave Plus para ser encendido mediante domótica Z-Wave y ser usado como un sensor de presencia exterior, alimentado, sin baterias y que

FUNCIONES :

Proyector LED con detector de movimiento Z-Wave
Comunicación inalámbrica bidireccional
Integra el protocolo de seguridad S2
Auto inclusión con el controlador Z-Wave
Protección IP44 para uso en exteriores
Temporizador ajustable y umbral de brillo
Ángulo de la lente giratoria
Modo de prueba para una fácil instalación en exteriores

ESPECIFICACIONES TÉCNICAS

Alimentación: 100V - 240VAC, 50 / 60Hz
Consumo de energía: 20W
Flujo luminoso: 1500 lm
Temperatura de color: 5000K, blanco frío
CRI: ≧70
Ángulo de iluminación: >90°.
Frecuencia: 868.42 Mhz
Alcance: hasta 100 m en campo abierto
Ángulo de cobertura PIR: 110° a 8m, altura 2.4m
Ajuste del ángulo del sensor :
Horizontal: 60°.
Hasta 30° a la izquierda
Hasta 30° a la derecha
Regulación del brillo: 30 - 200 lux
Ajuste del temporizador: 8±5 segundos - 12±4 minutos
Peso: 830g
Dimensiones: 201 x 196 x 88,8 mm
Temperatura de funcionamiento: -10 ~ 45° C
Humedad: 95%RH máx.
Clasificación eléctrica: CLASE II

Información Ampliada Z-Wave (Inglés)

Nombre: Z-Wave Floodlight with Motion Detector

Fabricante:Everspring

Identificador:EH403-3

Número de Certificación Z-Wave:ZC10-18056122

Plataforma Hardware:SD3502

FLiRS:NO

Tipo de Role:Always On Slave

Descripción Corta:Z-Wave Floodlight with Motion Detector

Descripción:The EH403 is an outdoor security floodlight equipped with Z-Wave wireless communication capability. It features a PIR detector to detect motion through movement of heat sources and a lux sensor for determining brightness of its surroundings. When not connected to a Z-Wave network, EH403 is fully operational as a standalone security floodlight. During hours of darkness its PIR detector turns on the 20W floodlight when it detects movement in the protected area. Its built-in timer will then turn off the floodlight after a preset time has elapsed. During daylight hours, its lux sensor saves energy by deactivating the motion sensor and the floodlight. The lux level and the timer can be set through knobs on the device itself. When added into a Z-Wave network, EH403 communicates directly with other end devices such as smart plugs, or to report directly to a Z-Wave controller (usually a gateway). It alerts the controller when motion is detected and through Z-Wave commands, the controller can remotely turn on/off the floodlight at any time and be able to configure its lux level and timer setting. This product supports the S2 security protocol that uses encrypted Z-Wave Plus messages to communicate to other security-enabled Z-Wave Plus products. A security-enabled Z-Wave Plus Controller must be used in order to fully utilize the security features of this product.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

1

Command Class: -Device Reset Locally Notification -Notification Report -Binary Report -Sensor Multilevel Report Group Name: Lifeline

2

4

Command Class: -Basic Set Group Name: PIR Control

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

1

2

15

PIR Trigger Off period

Period to send Trigger Off command after PIR is triggered. Before this period expires, the PIR will not be able to detect any subsequent motion.

2

50

Lux sensor threshold

Lux level to activate the PIR. When the lux level falls below this threshold and the PIR gets triggered, the unit emits a Basic Set Command (Valus=0Xff) and turns on its floodlight. This overwrites the Lux level set by the Lux knob.

3

2

0

Lux auto report

Period to report Lux value.

Basic

COMMAND_CLASS_BASIC

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic

COMMAND_CLASS_BASIC

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V4

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Notification V4

COMMAND_CLASS_NOTIFICATION_V4

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Sensor Multilevel V5

COMMAND_CLASS_SENSOR_MULTILEVEL_V5

Supervision

COMMAND_CLASS_SUPERVISION

Switch Binary

COMMAND_CLASS_SWITCH_BINARY

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V2

COMMAND_CLASS_VERSION_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Exclusion

1. Put the Z-Wave Controller into exclusion mode.

2. Press the tamper switch 3 times within 1.5 seconds to put the unit into exclusion mode.

Factory Reset

1. Press the tamper switch 3 times within 1.5 seconds to put the unit into exclusion mode

2. Within 1 second of step 1, press the tamper switch again and hold until LED is off (about 5 seconds).

3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes.

4. Please use this procedure only when the network primary controller is missing or otherwise inoperable

Inclusion

Auto Inclusion

The unit supports Auto Inclusion feature where it will automatically enter Inclusion mode when first powered up after a factory reset.

1. Prepare the Z-Wave controller.

2. Plug the cable plug to the wall socket to power up the unit.

3. The Link LED will start to blink slowly with 2-second on, 2-second off (for 2 minutes) which shows the unit does not be paired.

4. Within 30 seconds, put the Z-Wave Controller into inclusion mode.

5. The Inclusion process should be completed when the Link LED stops blinking.

Note: If you are connecting this unit to a Z-Wave Controller that utilizes the S2 security protocol, you may be asked by your controller to enter a 5-digit Device Specific Key (DSK) that is unique to each unit. This can be found in one of two places:

- on the QR code label on the back of the unit

- on the insert card inside the packaging.

6. Turn on the floodlight using the controller to check if the auto inclusion is working properly.

Manual Inclusion

1. Prepare the Z-Wave controller.

2. Press the tamper switch 3 times within 1.5 seconds to put the unit into inclusion mode.

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED

Sensors

Sensor types supported by the product.

Color

If the product is only available in one color, pick the color from the list.

IP (Ingress Protection) Rated

Product is suitable for Outdoor use and is waterproof under an IP (Ingress Protection) rating system.

Outdoor Use

Product is suitable for use outdoors.