Productos más vistos

Philio PAD02 -...

Dimmer o atenuador o regulador en...

EN OFERTA

Ver más grande

Previo

Philio PAD02 - Casquillo dimmer Z-Wave para bombilla E27

Referencia PHIEPAD02

Estado: Nuevo

Dimmer o atenuador o regulador en formato de casquillo convencional de tecnología Z-Wave Plus para dimmear fácilmente las bombillas de tu hogar u oficina.

Más detalles

Sin Stock

Eliminar de mis favoritos
Agregar este producto a mis favoritos
Imprimir

Características técnicas

Tecnología Domótica	Z-Wave Plus
Característica	Dimmer

Descripción

Transforma cualquier hogar u oficina en una casa inteligente con el zócalo de atenuación inteligente Z-Wave Philio PAD02. El zócalo o casquillo atenuador se puede adaptar fácilmente a sus dispositivos y lámparas de iluminación actuales, usa su lámpara existente (zócalo o casquillo E27), y proporciona control remoto inalambrico Z-Wave en la iluminación del techo o lamparas de pie o mesilla. Utilice la función de atenuación para personalizar la salida de iluminación y crear el ambiente perfecto para cualquier habitación. Brindando la máxima flexibilidad, el zócalo de atenuación inteligente Philio Z-Wave le permite operar la iluminación por sí mismo o integrar fácilmente el zócalo con configuraciones de cableado bidireccional, tridireccional o cuádruple agregando los módulos de conmutación inteligente Philio para Z-Wave . Tome el control de la iluminación de su hogar con los controles de iluminación inteligentes Philio Z-Wave.

Se adapta fácilmente a cualquier toma de corriente estándar de la lámpara E27 con el zócalo de atenuación inteligente Philio Z-Wave para encender y apagar la iluminación o ajustar los niveles de iluminación con su dispositivo móvil o computadora con cualquier entrada certificada Z-Wave. Se puede controlar en grupos de luces múltiples o se puede usar para crear escenas de iluminación interior ambiente regulables.

Características técnicas:

Z-Wave Plus
EU frequency: 868,42 MHz
Package content: 1x Socket Dimmer
Power supply: 110-230V AC, 50 Hz
Maximum wattage: 200W (incandescent lamps); 20W (LED lamps)
Socketsize: E27 to E14

Article Dimensions (WxHxL)	68 x 83 x 27 mm
Package Dimensions (WxHxL)	90 x 61 x 84 mm
Article net weight	0.051 Kg
Article gross weight	0.09459 Kg
Z-Wave Plus
WEEE
CE

Información Ampliada Z-Wave (Inglés)

Nombre: Z-Wave Smart Dimmer Socket

Fabricante:Philio

Identificador:PAD02

Número de Certificación Z-Wave:ZC10-17045556

Plataforma Hardware:SD3502

FLiRS:NO

Tipo de Role:Always On Slave

Descripción Corta:PAD02 is an E27(EU)/ E26(US) Edison screw based lamp socket, which provides electrical connection to the E14(EU)/ E12(US) Edison screw based lamps and support it in the lighting fixture. The use of socket allows lamps to be safely and conveniently replaced.

Descripción:PAD02 is an E27(EU)/ E26(US) Edison screw based lamp socket, which provides electrical connection to the E14(EU)/ E12(US) Edison screw based lamps and support it in the lighting fixture. The use of socket allows lamps to be safely and conveniently replaced. You can On/Off the light by pressing the button briefly, or a long pressing to control the brightness of dimmable lightbulb. This dimmer is a transceiver which is a security enabled device which based on Z-Wave Plus technology. Z-Wave PlusTM enabled devices displaying the Z-Wave PlusTM logo can also be used with it regardless of the manufacturer, and can also be used in other manufacturer’s Z- WaveTM enabled networks. Remote dim level control of the connected light is possible with other manufacturer’s wireless Controller. Since PAD02 supports Security Command Class, it can learn with a Secured enabled controller to fully utilize the device. Its functionality and supported command classes is identical when included as a secure and non-secure device. Adding to Z- WaveTM Network In the front casing, there is an on/off button with LED indicator below which is used to switch on and off, dim level, or carries out add, remove, reset or association. When first power is applied, its LED flashes on and off alternately and repeatedly at 0.5 second intervals. It implies that it has not been assigned a node ID and start auto inclusion. Auto Inclusion The function of auto inclusion will be executed as long as the dimmer does not have Node ID and just connect the dimmer to main power. Note: Auto inclusion timeout is 2 minute during which the node information of explorer frame will be emitted once every several seconds. Unlike “inclusion” function as shown in the table below, the execution of auto inclusion is free from pressing the On/Off button on the dimmer.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

Lifeline The dimmer can be set to send reports to associated Z-Wave devices. It supports one association group with one node support for Grouping 1. For group 1, the dimmer will report ALARM_REPORT 、DEVICE_RESET_LOCALLY_NOTIFICATION and MULTILEVEL_SWITCH_REPORT.

When the On/Off status changes or the dim level is achieved manually, it will send BASIC_SET command to group 2 nodes to make them unanimous.

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

Dimmer Level Report mode

Whenever dimmer on/off state changes, it will send MULTILEVEL_SWITCH_REPORT to the nodes of group1. The default setting is Enable the function.

LED indication mode

1. Show dimmer State：When dimmer is on, LED is on. When dimmer is off, LED is off. The default setting is Show dimmer State. 2. Show Night mode：When dimmer is on, LED is off. When dimmer is off, LED is on. 3. One flash mode : When dimmer on/off state changes, LED will light on one second and then off.

Restore dimmer state

Whenever the AC power return from lost, PAD02 will restore the switch state which could be Dimmer off、Last dimmer state、Dimmer on. The default setting is Last dimmer state.

Basic

COMMAND_CLASS_BASIC

Alarm

COMMAND_CLASS_ALARM

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic

COMMAND_CLASS_BASIC

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V2

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Scene Activation

COMMAND_CLASS_SCENE_ACTIVATION

Scene Actuator Conf

COMMAND_CLASS_SCENE_ACTUATOR_CONF

Security S0

COMMAND_CLASS_SECURITY

Switch Multilevel V2

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

Version V2

COMMAND_CLASS_VERSION_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Factory Reset

Use this procedure only in the event that the primary controller is lost or otherwise inoperable.

1. Pressing Include button of PAD02 three times within 2 seconds will enter inclusion mode.

2. Within 1 second, press Include button of PAD02 again for 5 seconds.

3. IDs are excluded.

Inclusion

1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer.

2. Pressing Include button of PAD02 three times within 2 seconds will enter inclusion mode.

Exclusion

1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer.

2. Pressing Include button of PAD02 three times within 2 seconds will enter exclusion mode.

3. Node ID has been excluded.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Switch Load Capacity Watts

The amount of switch load energy the product is rated for in Watts

Neutral Wire Required

For electric in-wall/wired switches, indicate whether a neutral wire is required for installation.

Z-Wave Scene Type

Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene

Color

If the product is only available in one color, pick the color from the list.