Productos más vistos

Philio PSP05 - Sensor...

Sensor de presencia o movimiento de...

Philio Sensor de movimiento para exterior con soporte magnético y visera de lente IR

Ver más grande

Previo

Philio PSP05 - Sensor de movimiento para exterior con soporte magnético y visera de lente IR

Referencia PHIEPSP05-D

Estado: Nuevo

Sensor de presencia o movimiento de tecnologia Z-Wave del fabricante Philio para su uso en exterior. Colocacion mediante sistema de imanes. Esto ofrece la posibilidad de cambiar baterias sin herramientas entre otras ventajas.

Más detalles

En Stock - Envío inmediato

Valoración

Leer los comentarios de los usuarios (1)
Escribe tu opinión

Eliminar de mis favoritos
Agregar este producto a mis favoritos
Imprimir

Características técnicas

Tecnología	Z-Wave Plus

Descripción

El sensor de movimiento Philio tiene un diseño esférico compacto y detecta movimiento a una distancia de hasta 10 metros. Se puede instalar con bastante facilidad con el soporte de pared magnético. Esto le permite colocar el sensor poco visible en su sala de estar, por ejemplo, al encender la luz automáticamente. Además, puede usarlo para escenas de alarma.

Además, el sensor operado con batería es adecuado para uso en exteriores. También incluye una cubierta de lente. Con la cubierta, puede ocultar un área que no debe ser detectada por el detector de movimiento, ademas de proteger el interior del sol.

caracteristicas:

Sensor de movimiento en diseño esférico
Con soporte de pared magnético
Área de monitoreo de 360 °
Clase de protección: IP43 (resistente a la intemperie)
Volumen de entrega: sensor incl. batería, montaje en pared, tapa de la lente
Fuente de alimentación: batería CR123
Tecnología inalámbrica: Z-Wave Plus
Dimensiones: 53x50x50 mm

Dimensiones (WxHxL)	48 x 83 x 68 mm
Dimensiones del embase (WxHxL)	89 x 84 x 62 mm
Peso neto del sensor	0.070 Kg
Z-Wave Plus
WEEE
CE
IP-Rating	IP43

Descargar

Manual Sensor Movimiento Philio

Manual del sensor de movimiento Philio PSP05

Descargar (109.98k)

Información Ampliada Z-Wave (Inglés)

Nombre: Single Function PIR Sensor

Fabricante:Philio

Identificador:PSP05

Número de Certificación Z-Wave:ZC10-16105258

Plataforma Hardware:SD3502

FLiRS:NO

Tipo de Role:Reporting Sleeping Slave

Descripción Corta:The PIR sensor PSP05 has PIR sensor function.

Descripción:The PIR sensor PSP05 has PIR sensor function,based on Z-Wave™ technology.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

Z-Wave Plus Lifeline

light control

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

Auto Report Battery Time

The Interval time for auto report the battery level. 0 means turn off auto report battery. The default value is 12.The tick time can setting by the configuration NO.20.

-1

Basic Set Level

Setting the BASIC command value to turn on the light. -1(0xFF) means turn on the light. For dimmer equipment 1 to 100 means the light strength. 0 means turn off the light. Caution: The range is from 0x00 to 0xFF using hexadecimal notation.

Auto Report Tick Interval

The interval time for auto report each tick. Setting this configuration will effect configuration NO.10. The unit is 1 minute. Caution 1:Setting to 0 means turn off all auto report function. Caution 2:The range is from 0x00 to 0xFF using hexadecimal notation.

PIR Sensitivity

PIR sensitivity setting. 0 means disable the PIR motion. 1 means the lowest sensitivity. 99 means the highest sensitivity. High sensitivity means can detected long distance,but if there is more noise signal in the environment, it will re-trigger too frequency.

Multi-Sensor Function Switch

Multisensor function switch.Using bit to control.

Customer Function

PIR Re-Detect Interval Time

In the normal mode, after the PIR motion detected, setting the re-detect time. 8 seconds per tick,default tick is 3(24 seconds). Setting the suitable value to prevent received the trigger signal too frequently. Also can save the battery energy.

Turn Off Light Time

After turn on the light,setting the delay time to turn off the lighting when the PIR motion to turn off the lighting when the PIR motion is not detected.8 seconds per tick,default tick is 4(32 seconds). 0 means never send turn off light command.

Basic

COMMAND_CLASS_BASIC

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Battery

COMMAND_CLASS_BATTERY

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Multi-Command

COMMAND_CLASS_MULTI_CMD

Notification V4

COMMAND_CLASS_NOTIFICATION_V4

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Sensor Binary V2

COMMAND_CLASS_SENSOR_BINARY_V2

Version V2

COMMAND_CLASS_VERSION_V2

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Factory Reset

There is a button on PSP05.

1. Pressing button for about 5 seconds.

2. IDs are excluded and all settings will reset to factory default.

Notice: Use this procedure only in the event that the primary controller is lost or otherwise inoperable.

Device Wake-Up

There is a button on PSP05.

Press the button once, the device will awake 10 seconds.

Inclusion

There is a button on PSP05.

1. Have Z-Wave™ Controller entered inclusion mode.

2. Pressing button once to enter the inclusion mode.

3. After add successful, the device will wake to receive the setting command from Z-Wave™ Controller about 20 seconds.

Exclusion

There is a button on PSP05.

1. Have Z-Wave™ Controller entered exclusion mode.

2. Pressing button once to enter the exclusion mode.

Color

If the product is only available in one color, pick the color from the list.

Battery Quantity

Enter the number of batteries of the designated type that the product uses.

Battery Type

Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.

Sensors

Sensor types supported by the product.