Aeotec NanoMote Quad - Controlador de escenas Z-Wave

Características técnicas

Tecnología Domótica	Z-Wave Plus

Descripción

Las aplicaciones no siempre son cómodas, el control por voz no siempre está disponible - ¡el NanoMote de Aeotec siempre está ahí!

Con el Aeotec NanoMote usted controla dispositivos y escenas en su hogar inteligente de forma fácil e intuitiva - en la pared y en su mano - con uno o cuatro botones.

El NanoMote Quad de Aeotec es un interruptor de pared estacionario de 4 botones, así como un mando a distancia portátil, que puede integrarse en una red Z-Wave existente como controlador secundario para el control inalámbrico de dispositivos y escenas.

El Aeotec NanoMote envía comandos a la pasarela Z-Wave y controla dispositivos electrónicos, persianas y persianas o lámparas. El NanoMote Quad de Aeotec controla hasta 15 escenas automatizadas.

El dispositivo que funciona con pilas puede montarse en la pared o utilizarse como un mando a distancia portátil. También se puede utilizar como colgante en su llavero o llave de coche. Para evitar disparos involuntarios, el Aeotec NanoMote dispone de una función de bloqueo que se activa mediante una combinación predefinida de pulsaciones de teclas.

Características:

Mando a distancia con cuatro botones
Se puede utilizar como mando a distancia portátil o como interruptor de pared fijo
Control de dispositivos y hasta 15 escenas
Bloqueo del NanoMote mediante combinación predefinida de teclas para evitar disparos involuntarios.
Funciona con pilas (recargable mediante cable USB)
Tecnología inalámbrica: Z-Wave Plus

Información Ampliada Z-Wave (Inglés)

Nombre: NanoMote Quad

Fabricante:Aeotec

Identificador:ZWA003-C

Número de Certificación Z-Wave:ZC10-18036056

Plataforma Hardware:ZM5101

FLiRS:NO

Tipo de Role:Portable Slave

Descripción Corta:The NanoMote Quad is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway.

Descripción:TheNanoMote Quad is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway. You can also activate a scene like sleep scene, movie scene and entertainment scene with it.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

1

5

NanoMote Quad will send the central scene notification command and battery report command to the associated nodes if any button is triggered.

2

5

NanoMote Quad will send Basic Set command to the associated nodes if button 1 is pressed.

3

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 1 is pressed, hold and released, respectively.

4

5

Scene Controller will send Basic Set command to the associated nodes if button 2 is pressed.

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 2 is pressed, hold and released, respectively.

6

5

NanoMote Quad will send Basic Set command to the associated nodes if button 3 is pressed.

7

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 3 is pressed, hold and released, respectively.

8

5

NanoMote Quad will send Basic Set command to the associated nodes if button 4 is pressed.

9

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 4 is pressed, hold and released, respectively.

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

32

1

20

Level of low battery

Define a battery level as the “low battery”.

41

1

Enable send central scene notification.

set of sending central scene notification or not

42

1

255

Setting the duration value of the command switch multilevel.

43

1

0

Enable/disable the buzzer alarm when battery is running low.

set the buzzer alarm or not when battery is low

Basic

COMMAND_CLASS_BASIC

Battery

COMMAND_CLASS_BATTERY

Switch Multilevel V2

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Battery

COMMAND_CLASS_BATTERY

Central Scene V3

COMMAND_CLASS_CENTRAL_SCENE_V3

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V3

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V2

COMMAND_CLASS_VERSION_V2

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Controller Inclusion

Included device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode (see Z-Wave network controller operating manual).

3. Pressing and holding a button for 3 seconds.

4. If the inclusion is successful, the LED will blink in green less than for 5 seconds and then keep on for 15 seconds.

Controller Exclusion

To remove the NanoMote Quad from the Z-Wave network:

(1) Insert the LIR2450 battery.

(2) Set the Z-Wave network main controller into remove mode

(see Z-Wave controller operating manual).

(3) Triple click the a button, if the exclusion is successful, LED

will blink long.

Device Wake-Up

Pressing and holding a button for 3 seconds. Led will turn to green,

which means Scene Controller has been woken up.

Factory Reset

Pressing and holding a button for 20 seconds. Release the button after 20 seconds, LED will keep in yellow for 3 seconds. Scene Controller will be reset to factory defaults if you short press the button within this 3 seconds.

Please use this procedure only when the network primary controller is missing or otherwise inoperable.

S2 Unauthenticated

S2_UNAUTHENTICATED

Battery Quantity

Enter the number of batteries of the designated type that the product uses.

Battery Type

Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.

Z-Wave Scene Type

Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene