Aeotec Door/Window Sensor 7 V2 Serie 700 apertura puerta o ventana

Características técnicas

Tecnología	Z-Wave Serie 700

Descripción

Sensor de apertura de puerta Z-Wave+ V2 (700 series) Aeotec Door/Window Sensor 7

El sensor para puertas y ventanas Aeotec Door/Window Sensor 7 es un sensor que detecta si la ventana está abierta o cerrada. El sensor es fácilmente adaptable.

El sensor de ventana de puerta Aeotec 7 (serie 700) es un sensor GEN7 básico que detecta si su ventana está abierta o cerrada.

Gracias a su delgado diseño, el sensor de ventana de puerta Aeotec 7 puede colocarse discretamente en cualquier ventana. El sensor sólo tiene que instalarse en el marco de la ventana. Además, dispone de un imán delgado instalado cerca del sensor en el marco de la ventana.

Si su sensor de ventana de puerta Aeotec 7 (serie 700) le falla una vez, el núcleo -la placa de circuito- se puede sustituir fácilmente sin necesidad de desmontar el sensor. Esto le permite pegar el dispositivo al marco de la ventana y sustituir sólo la placa de circuito.

Características:

Construido con la serie Z-Wave 700 - mayor alcance, más eficiente y mejor rendimiento en comparación con la serie de generación anterior
Sensor Z-Wave para puertas y ventanas
Detección de abierto y cerrado
Tecnología inalámbrica: Z-Wave Plus V2
Inicio inteligente
Seguridad S2
Cambio sencillo y sin residuos de la placa de circuitos
Protección antisabotaje incorporada
Alimentado por batería (1x ER14250), hasta 3 años de duración de la batería (según uso)

Dimensiones (AxAxF)	19 x 71 x 18 mm
Dimensiones del embalaje (AxAxF)	73 x 121 x 33 mm
Peso neto	0.015 Kg
Peso bruto	0.070 Kg
Bateria	ER14250 (1/2AA)
Z-Wave S2
WEEE
CE
IP-Rating	IP20

Información Ampliada Z-Wave (Inglés)

Nombre: Door/Window Sensor 7

Fabricante:Aeotec

Identificador:ZWA008-C

Número de Certificación Z-Wave:ZC10-19066568

Plataforma Hardware:ZM5101

FLiRS:NO

Tipo de Role:Reporting Sleeping Slave

Descripción Corta:Z-Wave Door/ Window Sensor 7.

Descripción:Aeotec Door/ Window Sensor 7 is a small window position sensor for your smart home, it monitors window and their exact opening position and lets your know when a window is tilted or completely opened. It also supports connecting external binary sensors through the dry binary contact of the Door/ Window sensor.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

1

5

Z-Wave Plus Lifeline

2

5

Control devices when magnet or external dry contacts trips

3

5

Sends our alarm message when magnet controlled or external dry sensor trips.

4

5

Sends alarm messages when tamper is tripped

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

1

0

Sensor Operation Mode

This parameter defines if the internal magnet sensor or the external terminal input is detected and used to issue alarm notification. There is always one input active only. The other sensor input the deactivated.

10

2

0

Time Delay of ‘Off‘ command frame

Off command is sent after a delay defined in this parameter.

11

2

0

Delay of Tamper Alarm Cancellation

Time a tamper alarm is delayed.

12

1

Reporting Tamper Alarm Cancellation

This parameter defines if the alarm cancellation event is reported.

13

1

0

Central Scene Event Functionality

This parameter enables/disables the central scene function.

14

1

Tilt Sensor Functionality

This parameter enables/disables the tilt function.

2

1

0

Sensor State Polarity

This parameter defines the polarity of the magnet sensor.

3

1

7

Visual LED Indications

This parameter defines when the red LED will indicate events. Disabling all indications may extend battery life.

4

1

0

Range Test after double click

Allows to enable the activation of a Z-Wave range test with double clicking the tamper switch.

5

1

0

2nd Association Group Trigger

his parameter defines the status of the magnet switch that causes sending a BASIC command to all devices of Association Group 2.

6

1

2

Command Sent to Devices of Association Group 2

This parameter defines which commands is sent to 2nd Association Group

7

1

-1

BASIC command value sent to 2nd Association Group on ‘On‘ event

This is the BASIC command value sent in case of ‘On‘ event.

8

1

0

BASIC command value sent to 2nd Association Group on ‘Off‘ event

This is the BASIC command value sent in case of ‘Off‘ event.

9

2

0

Time Delay of ‘Off‘ command frame

Off command is sent after a delay defined in this parameter.

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Battery

COMMAND_CLASS_BATTERY

Central Scene V3

COMMAND_CLASS_CENTRAL_SCENE_V3

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V4

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Multi-Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Notification V8

COMMAND_CLASS_NOTIFICATION_V8

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S2

COMMAND_CLASS_SECURITY_2

Sensor Binary V2

COMMAND_CLASS_SENSOR_BINARY_V2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V3

COMMAND_CLASS_VERSION_V3

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Factory Reset

This device also allows to be reset without any involvement of a Z-Wave controller. This procedure should only be used when the primary controller is inoperable.

Once Cover is removed and tamper switch is tripped, push the tamper for 5 seconds until red LED blinks. Then release tamper and push it again for 5 seconds until LED blinks.

Inclusion

Tripple clicking the tamper button includes (adds) the device.

Exclusion

Tripple clicking the tamper button excludes (removes) the device.

Device Wake-Up

A single click on the tamper button will wakeup the device.

Additional Special Features

It supports connecting external sensor. E.g. Dry Contact Sensor, Water Sensor probes.

S2 Unauthenticated

S2_UNAUTHENTICATED

Battery Quantity

Enter the number of batteries of the designated type that the product uses.