Aeotec Door-Window Sensor 6 sensor z-wave triangular precio españa

Características técnicas

Tecnología	Z-Wave Plus

Descripción

No más piezas de plástico grandes en las puertas elegantes y caras. El sensor para puerta / ventana Aeotec Door-Window Sensor 6, es pequeño , casi invisible y se puede pintar. De muy fácil instalación, el sensor de puerta / ventana Aeotec Door-Window Sensor 6, se monta en la esquina de una puerta o ventana con cinta de doble cara. Su batería de iones de litio incorporada, le permite tener un perfil muy pequeño ya que mide tan sólo 9 mm.

El sensor de puerta / ventana Aeotec Door-Window Sensor 6, cubre el papel tradicional de un sensor de seguridad y protección, proporcionando a la red Z -Wave un control de puertas o ventanas cruciales tanto para seguridad como para ahorro y confort en su sistema de control domótico por Z-Wave.

Características del producto:

Muy pequeño: sólo 9 x 72 mm
Se puede pintar para hacer la instalación casi invisible. Elaborado a partir de acrilonitrilo butadieno estireno plástico ( ABS ) .
duración de la batería de más de medio año . batería recargable Li-ion con construido en 500 mAh de capacidad
Tecnología Gen5 usando la serie 500 Z -Wave Plus.
Notificaciones de batería baja
Actualizaciones de firmware inalámbricos.
Optimizado alcance de la antena: 150 metros de punto a punto.

Información Ampliada Z-Wave (Inglés)

Nombre: Door/ Window Sensor 6

Fabricante:Aeotec

Identificador:ZW112-C

Número de Certificación Z-Wave:ZC10-16010008

Plataforma Hardware:ZM5101

FLiRS:NO

Tipo de Role:Reporting Sleeping Slave

Descripción Corta:Aeon Labs Door/ Window Sensor 6 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time.

Descripción:Aeon Labs Door/ Window Sensor 6 is a smart Z-Wave sensor that can detect the status of door/window's open/close in real time. It’s a security Z-Wave device that supports security encryption. Also it supports the “Over the Air Firmware Updating” that allows you wirelessly update its firmware if needs. It can be included and operated in any Z-Wave network with other Z-Wave certified devices from manufacturers and/or other applications.

Descargue el manual desde aquí.

Grupo

Max Nodos

Descripción

1

5

Group 1 is assigned to the Lifeline association group and every device has 5 nodes to associate. The sensor binary report, basic set or notification report command can be sent in this group when the Sensor is triggered.

Número

Tamaño (Bytes)

Valor por Defecto

Nombre

Descripción

1

Which value of the Sensor Binary Report or Basic Set will be sent when the door is Opened/Closed.

To set which value of the Sensor Binary Report or Basic Set will be sent when the door is Opened/Closed.

101

1

Enable/disable the function of parameter 111

Enable/disable the function of parameter 111. Note: this parameter cannot disable the low battery checking of the Sensor itself.

111

4

86640

Set the interval time of low battery checking.

Set the interval time of low battery checking. Note: 1, if the value is less than 10, the time unit is second. If the value is more than 10, the time unit is 4 minutes, which means if the value is more than 10 and less than 240, the interval time is 4 minutes. If the value is more than 240 and less than 480, the interval is 8 minutes. 2, if the current battery report falls below the low battery value (configurable parameter 39), it will send battery report=0xFF.

121

1

To configure which sensor report will be sent when the door is opened/closed.

252

1

0

Lock/unlock all configuration parameters.

255

4

0

Reset the Sensor.

39

1

20

Set the low battery value.

Set the low battery value. (10% to 50%).

Basic

COMMAND_CLASS_BASIC

Inclusion

Turn the primary controller into inclusion mode, short press the product’s Action Button that you can find in the back of the product.

Exclusion

Turn the primary controller into exclusion mode, short press the product’s Action Button that you can find in back of the product.

Factory Reset

Press the Action Button once that you can find in the back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable.

Device Wake-Up

Press the Action Button once, which will trigger sending out the Wake up notification command, press and hold the Action Button for 3 seconds, which will toggle on/off the Sensor be waked up for 10 minutes.

Additional Special Features

Support ""Over the Air Firmware Updating"" and “Z-Wave Security”.