Aeotec NanoMote Quad - Controlador de cena Z-Wave

Características tecnicas

Tecnologia	Z-Wave Plus

Mais Informação

As aplicações nem sempre são confortáveis, o controle por voz nem sempre está disponível - o Aeotec NanoMote está sempre lá!

Com o Aeotec NanoMote, você controla dispositivos e cenas em sua casa inteligente de maneira fácil e intuitiva - na parede e na mão - com um ou quatro botões.

O Aeotec NanoMote Quad é um comutador de parede fixo de 4 botões, além de um controle remoto portátil, que pode ser integrado a uma rede Z-Wave existente como um controlador secundário para controle sem fio de dispositivos e cenas.

O Aeotec NanoMote envia comandos para o gateway Z-Wave e controla dispositivos eletrônicos, persianas e persianas ou lâmpadas. O NanoMote Quad da Aeotec controla até 15 cenas automatizadas.

O dispositivo alimentado por bateria pode ser montado na parede ou usado como controle remoto portátil. Também pode ser usado como um pingente no chaveiro ou na chave do carro. Para evitar disparos não intencionais, o Aeotec NanoMote possui uma função de bloqueio que é ativada por uma combinação predefinida de pressionamentos de tecla.

Características:

Controle remoto com quatro botões
Pode ser usado como controle remoto portátil ou como interruptor de parede fixo
Controle de dispositivo e até 15 cenas
Bloqueio do NanoMote por combinação predefinida de teclas para evitar disparos não intencionais.
Funciona com baterias (recarregáveis via cabo USB)
Tecnologia sem fio: Z-Wave Plus

Informação alargada da Z-Wave (Inglês)

Nome: NanoMote Quad

Fabricante:Aeotec

Identificador:ZWA003-C

Número de Certificação Z-Wave :ZC10-18036056

Plataforma de Hardware :ZM5101

FLiRS:Não

Tipo de Role :Portable Slave

Descrição breve :The NanoMote Quad is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway.

Descrição :TheNanoMote Quad is a wireless, portable and rechargeable scene switch. It can control a Z-Wave device, such as smart plug, smart dimmer with a Z-Wave gateway. You can also activate a scene like sleep scene, movie scene and entertainment scene with it.

Descarregue o manual a partir de aqui.

Grupo

Nodos máximos

Descrição

1

5

NanoMote Quad will send the central scene notification command and battery report command to the associated nodes if any button is triggered.

2

5

NanoMote Quad will send Basic Set command to the associated nodes if button 1 is pressed.

3

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 1 is pressed, hold and released, respectively.

4

5

Scene Controller will send Basic Set command to the associated nodes if button 2 is pressed.

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 2 is pressed, hold and released, respectively.

6

5

NanoMote Quad will send Basic Set command to the associated nodes if button 3 is pressed.

7

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 3 is pressed, hold and released, respectively.

8

5

NanoMote Quad will send Basic Set command to the associated nodes if button 4 is pressed.

9

5

NanoMote Quad will send switch multilevel set, the multilevel start level change and multilevel stop level change command to the associated nodes if button 4 is pressed, hold and released, respectively.

Número

Tamanho (Bytes)

Valor por defeito

Nome

Descrição

32

1

20

Level of low battery

Define a battery level as the “low battery”.

41

1

Enable send central scene notification.

set of sending central scene notification or not

42

1

255

Setting the duration value of the command switch multilevel.

43

1

0

Enable/disable the buzzer alarm when battery is running low.

set the buzzer alarm or not when battery is low

Basic

COMMAND_CLASS_BASIC

Battery

COMMAND_CLASS_BATTERY

Switch Multilevel V2

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Battery

COMMAND_CLASS_BATTERY

Central Scene V3

COMMAND_CLASS_CENTRAL_SCENE_V3

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V3

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V3

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Security S2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V2

COMMAND_CLASS_VERSION_V2

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Controller Inclusion

Included device:

1. Insert the LIR2450 battery.

2. Set the Z-Wave network main controller into learning mode (see Z-Wave network controller operating manual).

3. Pressing and holding a button for 3 seconds.

4. If the inclusion is successful, the LED will blink in green less than for 5 seconds and then keep on for 15 seconds.

Controller Exclusion

To remove the NanoMote Quad from the Z-Wave network:

(1) Insert the LIR2450 battery.

(2) Set the Z-Wave network main controller into remove mode

(see Z-Wave controller operating manual).

(3) Triple click the a button, if the exclusion is successful, LED

will blink long.

Device Wake-Up

Pressing and holding a button for 3 seconds. Led will turn to green,

which means Scene Controller has been woken up.

Factory Reset

Pressing and holding a button for 20 seconds. Release the button after 20 seconds, LED will keep in yellow for 3 seconds. Scene Controller will be reset to factory defaults if you short press the button within this 3 seconds.

Please use this procedure only when the network primary controller is missing or otherwise inoperable.

S2 Unauthenticated

S2_UNAUTHENTICATED

Battery Quantity

Enter the number of batteries of the designated type that the product uses.

Battery Type

Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.

Z-Wave Scene Type

Indicates which of the two types of Z-Wave scene command classes are supported. Scenes or Central Scene