ZOOZ Outdoor Motion Sensor

Características tecnicas

Tecnologia Domótica	Z-Wave Long Range

Informação alargada da Z-Wave (Inglês)

Nome: Outdoor Motion Sensor

Fabricante:Zooz

Identificador:ZSE70 800LR

Número de Certificação Z-Wave :ZC14-24110480

Plataforma de Hardware :EFR32ZG23A

FLiRS:Não

Tipo de Role :Reporting Sleeping End Node

Descrição breve :The Zooz 800 Series Outdoor Motion Sensor offers reliable motion, temperature, and light detection with Z-Wave Long Range, ideal for hands-free automation and enhanced outdoor security.

Descrição :The Zooz 800 Series Outdoor Motion Sensor offers reliable motion, temperature, and light detection with Z-Wave Long Range, ideal for hands-free automation and enhanced outdoor security.

Grupo

Nodos máximos

Descrição

1

5

2

5

Número

Tamanho (Bytes)

Valor por defeito

Nome

Descrição

1

6

Motion sensitivity

10

2

10

Light Threshold Check Time

11

1

2

Battery threshold

12

1

Temperature threshold

13

2

50

Light threshold

14

1

100

Temperature calibrate offset

15

1

100

Light calibrate offset

16

2

0

Dusk to Dawn

17

2

0

Automatic report interval time for temp

18

2

0

Automatic report interval time for light

2

30

Motion untrigger time

3

1

7

Motion group control

4

2

65280

Motion Group Value Setting

5

1

Temperature report scale

6

1

LED activity

7

1

10

Low battery threshold

8

2

4

Battery power checking interval

9

2

30

Temperature Threshold Check Time

Application Status

COMMAND_CLASS_APPLICATION_STATUS

Association Group Information (AGI) V3

COMMAND_CLASS_ASSOCIATION_GRP_INFO_V3

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Battery

COMMAND_CLASS_BATTERY

Configuration V4

COMMAND_CLASS_CONFIGURATION_V4

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta Data V5

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V5

Indicator V3

COMMAND_CLASS_INDICATOR_V3

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Multi Channel Association V3

COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION_V3

Multilevel Sensor V11

COMMAND_CLASS_SENSOR_MULTILEVEL_V11

Notification V8

COMMAND_CLASS_NOTIFICATION_V8

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security 0

COMMAND_CLASS_SECURITY

Security 2

COMMAND_CLASS_SECURITY_2

Supervision

COMMAND_CLASS_SUPERVISION

Transport Service V2

COMMAND_CLASS_TRANSPORT_SERVICE_V2

Version V3

COMMAND_CLASS_VERSION_V3

Wake Up V2

COMMAND_CLASS_WAKE_UP_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Where to find S2 DSK on product

If you’re using an S2 hub, it will ask you to enter the

DSK key or scan the QR code printed on the sticker on

the side of the cover to complete SmartStart inclusion.

Classic Inclusion

Put your Z-Wave® hub into inclusion mode and click

the Z-Wave® button 3 times as quickly as possible. The

LED indicator will start blinking to confirm inclusion

mode and turn off once inclusion is completed.

Classic Exclusion

1. Bring the sensor within direct range of your Z-Wave®

gateway (hub).

2. Put the Z-Wave® hub into exclusion mode (not sure

how to do that? ask@getzooz.com).

3. Click the Z-Wave® button 3 times quickly.

4. Your hub will confirm exclusion and the sensor will

disappear from your controller''s device list.

Wake-Up Procedure

The sensor’s wake-up interval is set to 4 hours by default to

save battery life. Use the Wake Up Command Class to adjust

the interval (in seconds, working in 3600s intervals, with 3600

as min and 86400 as max values). Click the Z-Wave® button

once to wake the sensor up manually. During wake-up, the

sensor turns the Z-Wave® radio for 10 seconds to receive

communication from the hub. Long wake-up interval will not

affect how o

Factory Reset Procedure

When your network’s primary controller is missing or

otherwise inoperable, you may need to reset the device

to factory settings manually. In order to complete the

process, make sure the sensor is powered, then hold

the Z-Wave® button down for at least 10 seconds.

The LED indicator will start flashing blue and turn solid

blue for a couple of seconds to indicate successful reset.

NOTE: All previously recorded activity and custom settings will be

erased from the device’s memory.

S2 Authenticated

S2_AUTHENTICATED

S2 Unauthenticated

S2_UNAUTHENTICATED

Battery Quantity

Enter the number of batteries of the designated type that the product uses.

Battery Type

Enter the type (e.g. AA, CR2032, AAA) of the battery/batteries that the product uses.

Color

If the product is only available in one color, pick the color from the list.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.