AEOTEC LED Bulb 6 Lâmpada LED multicor (E27)

Características tecnicas

Tecnologia	Z-Wave Plus

Mais Informação

A lâmpada LED AEOTEC 6 Multi-Color inteligente transforma a luz da sua casa em luzes inteligentes. A lâmpada LED se encaixa em todos os soquetes E27 e pode ser conectada à porta da frente da casa inteligente através da tecnologia sem fio Z-Wave logo após ser alimentada com 230V. O chip Z-Wave necessário já está integrado na caixa da lâmpada. Você pode variar o brilho e a cor da luz facilmente via controle remoto, smartphone ou tablet. Luz do dia, luz de velas ou atmosfera de festa: a partir de agora você pode definir uma atmosfera de luz de acordo com seus desejos. Você também pode usar cenas (por exemplo, no caso de um alarme) para ativar uma cor de luz apropriada, como vermelho.

A edição multicolorida da lâmpada LED 6 oferece 16 milhões de cores reguláveis. Dependendo do seu humor, você pode usar toda a gama de cores do arco-íris e muito mais.

Devido à tecnologia LED, o consumo de energia é muito baixo em comparação com as lâmpadas convencionais. A lâmpada Aeotec é tão brilhante quanto uma lâmpada convencional de 60 watts, mas só precisa de 9,5 watts. Você pode economizar dinheiro e proteger o meio ambiente porque a lâmpada LED tem uma vida útil de até 25.000 horas.

caracteristicas:

A lâmpada LED RGBW regulável oferece 16 milhões de cores
Aspecto claro: 2700K a 6500K
Brilho: 806 lumens
CRI: 80
Entrada: 220-240 V, 50 Hz
Lâmpada para tomada E27
Consumo de energia: máx. 9,5 W
Ângulo de feixe: 240 °
Tecnologia sem fio: Z-Wave Plus

Informação alargada da Z-Wave (Inglês)

Nome: LED Bulb 6:Multi-Colour

Fabricante:Aeotec

Identificador:ZWA002-C

Número de Certificação Z-Wave :ZC10-18046097

Plataforma de Hardware :ZM5101

FLiRS:Não

Tipo de Role :Always On Slave

Descrição breve :RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors

Descrição :✓ Standard form factor and appearance of the light bulb with 800 lm output ✓ RGBW: dimmable from 5% to 100%, tunable from 1800K to 6500K, and 16 million colors ✓ Possible to be included in groups, scenes, or schedules ✓ Suitable for indoor lighting: Corridors, Bedroom, Living Room, etc.

Descarregue o manual a partir de aqui.

Grupo

Nodos máximos

Descrição

1

Set Configuration parameter 0x50 0: nothing. 1: Send the Basic Report. 2. Send Device Reset Locally CC

Número

Tamanho (Bytes)

Valor por defeito

Nome

Descrição

1

0

User custom mode for LED animations.

User custom mode for LED animations. 0 = Disable custom mode. 1= Blink Colors in order mode. 2=Randomized blink color mode

16

1

20

Ramp rate when dimming using Multilevel Switch V1 CC in 100ms

Ramp rate when dimming using Multilevel Switch V1 CC in 100ms Value range = 0x00 -0x64

2

1

0

Enable/Disable Strobe over Custom Color.

Enable/Disable Strobe over Custom Color. 0 = Disable. 1 = Enable. Others = Ignore.

3

1

50

Set the rate of change to next color in Custom Mode.

Set the rate of change to next color in Custom Mode. Value1 ~ Value4: Value Range = 5 - 8640000 (50 - 86400000ms)

4

1

Set color that LED Bulb blinks in (Blink Mode)

Set color that LED Bulb blinks in (Blink Mode) -128 to 127 corresponds with the unsigned values 0 to 255 or hex values 0x00 to 0xFF

80

1

Enable to send notifications to associated devices (Group 1) when the state of LED Bulb is changed.

Enable to send notifications to associated devices (Group 1) when the state of LED Bulb is changed. 0 = Nothing. 1= Basic CC report.

81

2

2700

The user can configure the parameter to adjust the color component Warm White.

The user can configure the parameter to adjust the color component Warm White. Value range =Warm White(0x0A8C(2700k) ~ 0x1387 (4999k))

82

2

6500

The user can configure the parameter to adjust the color component Cold White.

The user can configure the parameter to adjust the color component Cold White. Value rang = Cold White (0x1388 (5000k) ~ 0x1964 (6500k))

Association Group Info

COMMAND_CLASS_ASSOCIATION_GRP_INFO

Association V2

COMMAND_CLASS_ASSOCIATION_V2

Basic

COMMAND_CLASS_BASIC

Configuration

COMMAND_CLASS_CONFIGURATION

Device Reset Locally

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Firmware Update Meta-Data V2

COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2

Manufacturer Specific V2

COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2

Powerlevel

COMMAND_CLASS_POWERLEVEL

Security S0

COMMAND_CLASS_SECURITY

Switch All

COMMAND_CLASS_SWITCH_ALL

Switch Color

COMMAND_CLASS_SWITCH_COLOR

Switch Multilevel V2

COMMAND_CLASS_SWITCH_MULTILEVEL_V2

Version V2

COMMAND_CLASS_VERSION_V2

Z-Wave Plus Info V2

COMMAND_CLASS_ZWAVEPLUS_INFO_V2

Exclusion

Remove for exclusion

1. Assuming led bulb was added to controller.

2. Triggered by OFF -> ON -> OFF -> ON -> OFF -> ON (between 0.5-2 seconds each time).

3. LED Solid Purple/Violet Color (0xEE82EE) during the unpairing process. (Timeout is 10 seconds).

 Failure:

Blinks between 100% White and Red 0x0000FF color for 3 seconds (at a rate of 200ms per flash), Once 3 seconds have passed, the LED should return to the last color ( memory status(color cc set)) of LED Bulb.

 Success:

Blinks between 100% White and Blue 0x0000FF color for 3 seconds (at a rate of 200ms per flash). Once 3 seconds have passed, the LED should return to a Warm White LED at 100%.

Factory Reset

Reset the Device.

1. Assuming led bulb was added to controller and was power on.

2. RGBW bulb re-power 6 times (between 0.5-2 seconds each time).

Note: ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON -> OFF -> ON

3. If the 6th power on, the led bulb change to Yellow color(into pairing process ), which means that the reset factory settings are successf.

Using this action in case of the primary controller is missing or inoperable.

Inclusion

Add for inclusion

1. Ensure the led bulb has been excluded outside the network.

2. Triggered by OFF ->ON (between 0.5-2 seconds each time)

3. LED solid yellow Color (0xFFFF00) during the pairing(Timeout is 10 seconds).

 Failure:

Blinks between 100% White and Red 0x0000FF color for 3 seconds (at a rate of 200ms per flash), Once 3 seconds have passed, the LED should return to a Warm White LED at 100%

 Success:

Blinks between 100% White and Green 0x00FF00 color for 3 seconds (at a rate of 200ms per flash). Once 3 seconds have passed, the LED should return to a Warm White LED at 100%.

Color

If the product is only available in one color, pick the color from the list.

Firmware Updatable

Indicates whether the firmware can be updated and whether it is done by the consumer or a technician.

Switch Load Capacity Watts

The amount of switch load energy the product is rated for in Watts